Ford 2013 Fusion Owner's Manual page 101

Hide thumbs Also See for 2013 Fusion:
Table of Contents

Advertisement

Maintenance
Message
LOW Engine Oil Pressure
Change Engine Oil Soon
Oil Change Required
Brake Fluid Level LOW
Check Brake System
Engine Coolant Overtem-
perature
Power Reduced to
Lower Engine Temp
Transport / Factory
Mode
See Manual
MyKey
Message
MyKey Not Created
MyKey Active Drive
Safely
Speed Limited to XX
MPH/km/h
Near Vehicle Top Speed
Information Displays
Stop the vehicle as soon as safely possible, turn off the engine.
Check the oil level. If the warning stays on or continues to
come on with your engine running, contact your authorized
dealer as soon as possible.
Displayed when the engine oil life remaining is 10% or less.
See Engine Oil Check (page 244).
Displayed when the oil life left reaches 0%. See Engine Oil
Indicates the brake fluid level is low and the brake system
should be inspected immediately. See Brake Fluid Check
Displays when the brake system needs servicing. Stop the
vehicle in a safe place. Contact your authorized dealer.
Displays when the engine coolant temperature is excessively
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Displays to indicate that the vehicle is till in Transport or
Factory mode. This may not allow some features to operate
properly. See your authorized dealer.
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
Displayed during key programming when MyKey cannot be
Displays when MyKey is active.
Displays when starting the vehicle and MyKey is in use and
the MyKey speed limit is on.
Displays when a MyKey is in use and the MyKey speed limit is
on and the vehicle speed is approaching 80 mph (130 km/h).
99
Action
Check (page 244).
(page 248).
high.
Action
programmed.

Advertisement

Table of Contents
loading

Table of Contents