Sony SRW-5000 Operation Manual page 166

Item number Item
605 TAPE TIMER
DISPLAY
606 TCG MODE select
607 TCG REGENE
SOURCE select
608 TCG/UBG REGENE
MODE
609 REC RUN/FREE
RUN select
610 DOWNCONVERTER
VICT output
611 VITC POSITION-1
select (NTSC)
166
Menu List
Setting Function
+/– 12H Selects whether the CTL counter operates in 12-hour
[24H]
display mode or 24-hour display mode.
+/–12H: 12-hour display mode
24H: 24-hour display mode
Note
In the ±12-hour display, the tens digit of the hours value is
dropped.
[preset] Selects the time code to which the internal time code
regene generator synchronizes.
auto preset: By an operation on the front panel or by remote
regene: The internal time code generator is synchronized
auto: Operates in regene mode when either assemble or
SDI-LTC If item 606 is set to "regene", this selects the source of the
SDI-VITC synchronization of the time code generated internally.
ext-LTC int-LTC: When the time code played back from the time
int-VITC
[int-LTC]
int-VITC: When the time code played back from the "AUX
ext-LTC: When the external time code input to the TIME
SDI-VITC: When the VITC input to the HD SDI INPUT
SDI-LTC: When the LTC input to the HD SDI INPUT
Selects the regenerate signal when the time code
generator is in regenerate mode (when item 606 is set to
TC
"regene") or during auto edit mode.
UB
TC & UB: The time code signal and user bits signal are
TC: The time code signal is regenerated.
UB: The user bits signal is regenerated.
[free run] This selects the way in which the time code advances.
rec run free run: Regardless of the operation mode of this unit, the
rec run: The time code advances only during recording.
Note
When using this setting, set item 606 to "preset".
[on]
Selects whether or not to insert VITC data in the HD-SD
off converter output.
on: VITC data is inserted.
off: VITC data is not inserted.
12,281 line When 29.97PsF/59.94i mode is selected on the VTR, this
setting specifies the lines in which the VITC signal is
inserted.
[16,279 line]
It can be inserted in any lines from 12,281 to 20,283.
20,283 line
Note
Items 611 and 612 allow VITC to be inserted in two lines.
control from a device connected to the REMOTE 1-
IN(9P) connector, the initial value of the time code
generated by the internal time code generator can be
preset.
("regene") to the time code values read by the internal
time code generator.
insert mode is selected and operates in preset mode
when any other mode is selected.
code track on the tape is used.
data" in the video signal on the tape is used.
CODE IN connector is used.
connector is used.
connector is used.
both regenerated.
time code advances all the time that the power is on.