Samsung PS43F4000 User Manual

Plasma TV
user manual
Contact SAMSUNG WORLD WIDE
Figures and illustrations in this User Manual are provided for reference only and
If you have any questions or comments relating to Samsung products,
may differ from actual product appearance. Product design and specifi cations
may be changed without notice. please contact the SAMSUNG customer care centre.
User Instructions
Country Customer Care Centre
 Screen Image retention AUSTRALIA 1300 362 603
Do not display a still image (such as on a video game) on the plasma display panel
NEW ZEALAND 0800 SAMSUNG (0800 726 786)
for more than several minutes as it can cause screen image retention. This image
retention is also known as "screen burn". To avoid such image retention, reduce the CHINA 400-810-5858
degree of brightness and contrast of the screen when displaying a still image.
HONG KONG (852) 3698 4698
 Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates
from the panel through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
INDIA 1800 3000 8282
However, children should be prevented from touching the upper part of the product.
1800 266 8282
 The product is making a "cracking" noise.
A "cracking" noise may occur when the product contracts or expands due to a INDONESIA 0800-112-8888 (Toll Free)
change in the surrounding environment such as temperature or humidity. This is (021) 56997777
normal and not a defect of the unit.
JAPAN 0120-327-527
 Cell Defects
MALAYSIA 1800-88-9999
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level)
pixels which require sophisticated technology to produce. However, there may be
PHILIPPINES 1-800-10-7267864 [PLDT]
a few bright or dark pixels on the screen. These pixels will have no impact on the
1-800-8-7267864 [Globe landline
performance of the product.
and Mobile]
 Avoid operating the TV at temperatures below 41°F (5°C)
02-4222111 [Other landline]
 A still image displayed too long may cause permanent damage to the PDP
SINGAPORE 1800-SAMSUNG(726-7864)
Panel.
Watching the Plasma TV in 4:3 format for a long period of time THAILAND 0-2689-3232,
may leave traces of borders displayed on the left, right and
1800-29-3232
centre of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause TAIWAN 0800-32-9999
similar effects to the screen.
VIETNAM 1 800 588 889
Damages caused by the above effect are not covered by the
GEORGIA 0-800-555-555
Warranty.
 After-images on the Screen.
ARMENIA 0-800-05-555
Displaying still images from Video games for longer than a certain period of time may
AZERBAIJAN 088-55-55-555
produce partial after-images.
To prevent this effect, reduce the "brightness" and "contrast" when displaying still UZBEKISTAN 8-10-800-500-55-500
images for a long time.
KYRGYZSTAN 00-800-500-55-500
 Warranty
Warranty does not cover any damage caused by image retention. TADJIKISTAN 8-10-800-500-55-500
Burn-in is not covered by the warranty. MONGOLIA +7-800-555-55-55
BELARUS 810-800-500-55-500
For India Only
MOLDOVA 0-800-614-40
This marking on the product, accessories or literature indicates
ALGERIA 0800 100 100
that the product and its electronic accessories should not be
disposed of with other household waste at the end of their
PAKISTAN 0800-Samsung (72678)
working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
TUNISIA 80-1000-12
separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
For personal and non-commercial use only.
For more information on safe disposal and recycling visit our website
www.samsung.com/in or contact our Helpline numbers - 18002668282, Usage is subject to following the guidelines in the User Manual and
180030008282.
may not be available in all regions.
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04871J-01
- 1 -
BN68-04871J
Remote Control
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Displays and selects the available video
Turns the TV on and off.
sources.
Press to directly access to channels.
Alternately select Teletext ON, Double, Mix or OFF. Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the main on-screen menu.
Displays the channel list on the screen.
Views the Media Play. HDMI Selects the HDMI mode directly.
Quickly select frequently used functions. Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
Returns to the previous menu.
Exit the menu.
A B C D Use these buttons according to the direction
on screen.
SPORTS
P.MODE: Selects the picture mode.
P.MODE P.SIZE
P.SIZE: Selects the picture size.
Use these buttons in a specifi c feature.
: Sports Mode on or off.
Installing batteries (Battery size: AAA)
NOTE
• Use the remote control within 23 feet from TV.
Bright light may affect the performance of the remote control. Avoid using nearby special fl uorescent light or neon signs.
•
The Colour and shape may vary depending on the model.
•
- 5 -
[PF4000-AR]BN68-04871J-01ENG.indd 1
Important Safety Instructions
Warning! Important Safety Instructions
(Please read the safety instructions below before installing and using the product.)
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE-
FER ALL SERVICING TO QUALIFIED PERSONNEL.
Web Site
www.samsung.com/au
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,
www.samsung.com/nz and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
www.samsung.com
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
www.samsung.com/hk
- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
(Chinese)
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
www.samsung.com/hk_en
• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
(English)
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
www.samsung.com/in
swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
www.samsung.com/id
• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the
environment. Please contact your local authorities for disposal or recycling information.
www.samsung.com • Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
www.samsung.com/my • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
www.samsung.com/ph
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
electrical supply. (depending on the model)
www.samsung.com/sg
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
www.samsung.com/th
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not
www.samsung.com/tw touch the power cord with wet hands.
www.samsung.com • If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact
an authorized dealer or service center.
www.samsung.com
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially
www.samsung.com
when children, elderly or disabled people will be left alone in the house).
www.samsung.com - Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause the
insulation to deteriorate.
www.samsung.com
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
www.samsung.com
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage
www.samsung.com to your set.
• Use only a properly grounded plug and receptacle.
www.samsung.com
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
www.samsung.com
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible
www.samsung.com
at all times.
• Do not allow children to hang onto the product.
www.samsung.com/n_
africa
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
www.samsung.com/pk/ • Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
www.samsung.com/n_
africa • To clean the product, unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the
product.
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
- English -
- 2 -
Edit Channel
Broadcasting Menu
You can edit or delete channels.
1. Go to Edit Channel screen.
❑ Memorizing channels
2. Press the ▲/▼ buttons to select the desired channel, then press
the ENTERE button. The (c) mark indicates the channel you've
Auto Tuning
selected.
You can select more than one channel.
(depending on the country)
Press the ENTERE again to deselect the channel.
Automatically allocated programme numbers may not correspond to
actual or desired programme numbers. If a channel is locked, the PIN
Using the coloured and function buttons with the Edit Channel
input window appears.
a Red (Change Number): Changes channel order on the channel list.
❑ Using the Channel menu − E (Done): Completes changing the channel order.
b Green (Lock / Unlock): Lock a channel so that the channel cannot
Channel List
be selected and viewed. / Unlock the channel that you locked.
This function is available only when the Channel Lock is set to On.
The Channel List contains the channels your TV displays when you press
The PIN input screen appears. Enter your 4-digit PIN. Change the PIN
the channel button. You can view channel information, All or Favourites
using the Change PIN option.
1-5. Press ►(Mode) button to change the channel mode.
{ Yellow (Delete): Deletes a channel from the channel list.
When you press the CH LIST button on the remote control, Channel
} Blue (Select All / Deselect All): Selects or deselects all channels
List screen will be displayed at once.
at once.
Channel Mode
(Go To): Goes to channel directly by pressing numbers (0~9).
Edit Favourites: Set channels you watch frequently as favourites. k (Page): Move to previous or next page.
For detailed information about using Edit Favourites, refer to "Edit
T (Tools): Displays the option menu. The option menu items that
Favourites".
appear may differ depending on the channel status and type.
Favourites 1-5: Shows all favourite channels, arranged in up to fi ve
− Category: Changes the channel mode to All, Recently Viewed,
groups. Each group has a separate screen.
Most Viewed. The selected channel mode is displayed.
The TV displays Favourites 1-5 only if you have added favourites − Edit Favourites: Go to Edit Favourites screen directly.
using Edit Favourites.
− Rename channel: Assign a name of up to fi ve characters to a
All: Shows all currently available channels.
channel. For example, Food, Golf, etc. This makes it easier to fi nd and
select the channel.
Schedule Manager
− Channel Info: Display details of the selected channel.
You can set a desired channel to be displayed automatically at the − Information: Display details of the selected programme.
intended time. In addition, you can view, modify or delete a channel you
Edit Favourites t
have reserved to watch.
You must set the current time first using the Time → Clock Set You can add, edit or delete favourite channels.
function in the System menu to use this function.
1. Go to Edit Favourites screen.
1. Press the Schedule on the Schedule Manager screen. The Schedule
2. Press the ▲/▼ buttons to select the desired channel, and then press
Viewing menu appears.
ENTERE button.
2. Press the ▲/▼/◄/► buttons to set each option menu.
3. Choose a specifi c favourite list among Favourites 1-5 using b
Channel: Select the desired channel.
(Change Fav.) button, and then press the { (Add) button. The
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to selected channel has been added in Favourites 1-5.
set at your convenience. If you select Manual, you can set the day you
One favourite channel can be added in several of favourites among
want.
Favourites 1-5.
The (c) mark indicates the day you've selected.
Date: You can set the desired date.
It is available when you select Once in Repeat.
Start Time: You can set the start time you want.
If you want to edit or cancel a reserved schedule, select the reserved
schedule on Schedule Manager. Then press the ENTERE button
and select the Edit or Delete.
- 6 -
Getting Started
Accessories
 Remote Control & Batteries (AAA x 2)
 Owner's Instructions
 Warranty Card / Regulatory Guide (Not available in some locations)
Input Cables (Sold Separately)
 Composite (AV)
 Component
This symbol indicates that high voltage is present inside. It
is dangerous to make any kind of contact with any internal
part of this product.
TV Controller (Panel Key)
This symbol indicates that important literature concerning
operation and maintenance has been included with this
The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
product .
Selecting the Media Play
Selecting the Menu
m R s Function menu
Power off
P
Return
Selecting a Source
Exits the menu when pressing the controller more than 1 second.
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Setup (Initial Setup)
When you turn the TV on for the fi rst time, a sequence of on-screen prompts will assist in confi guring basic settings. Press the
initial setup following instructions that the TV guides.
Connecting the power cord and aerial. (refer to 'Connections')
Using the coloured and function buttons with the Edit Favourites
a Red (Category / Change order)
− Category: Changes the channel mode to All, Recently Viewed,
Most Viewed. The selected channel mode is displayed.
− Change order: Changes the favourite channel order.
E (Done): Completes changing the channel order.
b Green (Change Fav.): Changes favourite list among Favourites 1-5.
{ Yellow (Add / Delete)
− Add: Adds selected channels to Favourites 1-5.
− Delete: Deletes the favourite channel from Favourites 1-5.
} Blue (Select All / Deselect All) : Selects or deselects all channels
at once.
(Go To): Goes to channel directly by pressing numbers (0~9).
k (Page): Move to previous or next page.
T (Tools): Displays the option menu. The option menu items that
appear may differ depending on the channel status and type.
− Copy to favourites: Copy the selected favourite channel in
Favourites 1-5. You can add from other favourite list.
− Rename Favourites: Assign your own favourite channel name.
− Edit Channel: Go to Edit Channel screen directly.
− Information: Display details of the selected programme.
❑ Other Features
Channel Settings
Area
(depending on the country)
You can change the desired area.
Manual Tuning
Scans for a channel manually and stores in the TV.
If a channel is locked, the PIN input window appears.
According to the channel source, Manual Tuning may be supported.
1. Press the New button.
2. Set the Programme, Colour System, Sound System, Channel and
Search.
3. Press the Store button. When scanning has fi nished, a channel is
updated in the channel list.
Channel mode
− P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
− C (aerial channel mode) / S or Z (cable channel mode) (depending
on the country): These two modes allow you to select a channel
by entering the assigned number for each aerial broadcasting
station or cable channel.
Fine Tune
If the signal is weak or distorted, fi ne tune the channel manually.
Fine tuned channels are marked with an asterisk "*".
To reset the fine-tuning, select Reset.
Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
use this function.
The PIN number input screen appears. Enter your 4 digit PIN number.
Supported file systems are FAT and exFAT.
Channel Lock
Lock channels in Channel menu to prevent unauthorized users, such as
children, from watching unsuitable programme.
Available only when the Source is set to TV.
Connections
 For better picture and audio quality, connect to a digital device using an HDMI
cable.
 The picture may not display normally (if at all) or the audio may not work if an
 Power Cord
external device that uses an older version of HDMI mode is connected to the TV. If
such a problem occurs, ask the manufacturer of the external device about the HDMI
version and, if out of date, request an upgrade.
 Be sure to purchase a certifi ed HDMI cable. Otherwise, the picture may not display
or a connection error may occur.
 Coaxial (RF)
 HDMI
HDMI connection
Set-top Box / Blu-ray players
HDMI OUT
TV Controller
Remote control sensor
The image is drawn by
facing the front side of
the TV.
USB
POWER button. Set the
W R
AUDIO IN
L-AUDIO-R
Audio connection
Amplifi er / Home Theater
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
TV / HDMI1 / HDMI2 / AV / Component
You can only choose external devices that are connected to the TV.
In the Source, connected inputs are highlighted.
- 3 -
PIP
Picture Menu
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in the same
❑ Changing the Preset Picture Mode
mode.
If you turn the TV off while watching in PIP mode, the PIP window
Picture Mode t
will disappear.
Select your preferred picture type. You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
PIP Settings
Movie: Suitable for watching movies in a dark room.
Main picture
❑ Adjusting Picture Settings
Component, HDMI
PIP: Activate or deactivate the PIP function.
Cell Light / Contrast / Brightness / Sharpness /
Source: Select the source for the sub-screen.
Colour / Tint (G/R)
Channel: Select the channel for the sub-screen.
Your television has several setting options for picture quality control. Size: Select a size for the sub-picture.
In analogue TV, AV modes of the PAL system, the Tint (G/R) function Position: Select a position for the sub-picture.
is not available.
Sound Select: You can choose the desired sound (Main / Sub) in
Settings can be adjusted and stored for each external device PIP mode.
connected to the TV.
❑ Changing the Picture Options
Lowering picture brightness reduces power consumption.
Picture Size
Advanced Settings
Set the various picture options such as picture size and aspect ratio.
(available in Standard / Movie mode)
The available items may differ depending on the selected mode.
You can adjust the detailed setting for the screen including colour and
Depending on the input source, the picture size options may vary.
contrast.
t
Picture Size : Your cable box/satellite receiver may have its
Dynamic Contrast: Adjust the screen contrast.
own set of screen sizes as well. However, we highly recommend you
Black Tone: Select the black level to adjust the screen depth.
use 16:9 mode most of the time.
Flesh Tone: Adjust the fl esh tone colour.
− 16:9: Sets the picture to 16:9 wide mode.
RGB Only Mode: Displays the Red, Green and Blue colour for
− Wide Zoom: Magnifi es the picture size more than 4:3.
making fi ne adjustments to the hue and saturation.
Adjusts the Position by using ▲, ▼ buttons.
Colour Space: Adjust the range of colours available to create the
− Zoom: Magnifi es the 16:9 wide pictures vertically to fi t the screen size.
image.
Adjusts the Zoom or Position by using ▲, ▼ button.
White Balance: Adjust the colour temperature for a more natural
− 4:3: Sets the picture to basic (4:3) mode.
picture. R-Offset / G-Offset / B-Offset: Adjust each colour's (red,
Do not watch in 4:3 format for a long time. Traces of borders
green, blue) darkness.
displayed on the left, right and centre of the screen may cause
R-Offset / G-Offset / B-Offset: Adjust each colour's (red, green,
image retention (screen burn) which are not covered by the
blue) brightness.
warranty.
R-Gain / G-Gain / B-Gain: Adjust each colour's (red, green, blue)
− Screen Fit: Displays the full image without any cut-off when HDMI
brightness.
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
inputted. Reset: Resets the White Balance to its default settings.
Gamma: Adjust the primary colour intensity.
Zoom/Position: Adjust the picture size and position. It is only available
in Zoom. Motion Lighting: Reduce power consumption by brightness control
Position: Adjust the picture position. It is only available in Screen Fit or adapted motion.
Wide Zoom. Only available in Standard mode.
The available items may differ depending on the selected mode. When changing a setting value of Cell Light, Brightness or
Contrast, Motion Lighting will be set to Off.
Settings can be adjusted and stored for each external device
connected to an input on the TV.
If you use the Screen Fit function with HDMI 720p input, 1 line will be
cut at the top, bottom, left and right as in the overscan function.
Input Source Picture Size
ATV/AV 16:9, Wide Zoom, Zoom, 4:3
Component(480i, 480p, 576i,
16:9, Wide Zoom, Zoom, 4:3
576p, 720p)
Component(1080i, 1080p) 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
HDMI(720p, 1080i, 1080p) 16:9, Wide Zoom, Zoom, 4:3, Screen Fit
- 7 -
 For set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1(STB) port.
 The TV model i s not allowed for PC connection (distortion or incorrect picture
appear).
displaying can
AV connection Component connection
VCR Blu-ray player / DVD
VIDEO OUT AUDIO OUT COMPONENT OUT AUDIO OUT
L-AUDIO-R Y P B P R L-AUDIO-R
R Y W R R G B R W R
Y W R G B R W R
TV Side Panel
VHF/UHF Aerial
Power Input
or
ANT OUT
TV Rear Panel
PS43F4000 PS43F4100
PS51F4000
Cable
The side panel may differ The PDP device may interfere with an amateur radio or AM radio.
depending on the model. When using two-way radio mobile and portable units or amateur
radio or AM radio near by your TV, this may cause the TV to
malfunction.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. Name the
device connected to the input jacks to make your input source selection
easier.
Information
You can see detailed information about the selected external device.
- 4 -
Picture Options
Colour Tone
Warm1 or Warm2 will be deactivated when the picture mode is
Dynamic.
Settings can be adjusted and stored for each external device
connected to an input on the TV.
Digital Clean View: If the broadcast signal received by your TV is
weak, you can activate the Digital Clean View feature to reduce any
static and ghosting that may appear on the screen.
When the signal is weak, try other options until the best picture
is displayed.
Sub picture
Auto Visualisation: When changing analogue channels, displays
TV / AV
signal strength.
Only available for analogue channels.
When the INFO button is pressed, the signal strength bar is
displayed.
When bar is green, you are receiving the best possible signal.
MPEG Noise Filter: Reduces MPEG noise to provide improved
picture quality.
HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
Film Mode: Sets the TV to automatically sense and process fi lm
signals from all sources and adjust the picture for optimum quality.
Available in TV mode and external input mode which supports SD
(480i / 576i) and HD (1080i).
If the screen does not seem natural, change its option to Off /
Auto1 / Auto2 in Film Mode.
Analog Clean View: Reduces diagonal noise in picture caused by the
crosstalk of signals.
Picture Off
The screen is turned off but the sound remains on. Press any button
except volume button to turn on the screen.
Reset Picture
Resets your current picture mode to its default settings.
Sound Menu
❑ Changing the Preset Sound Mode
Sound Mode
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
- 8 -
2013-08-16 11:08:44