Sony MHC-GN1100D Operating Instructions Manual page 71

F D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC
controller. You need to connect the
D-LIGHT SYNC controller to a
lighting device* (not supplied). The
lighting device will react according to
the control signals transmitted by the
D-LIGHT SYNC controller upon
receiving music source from the
system. For details on the use of the
D-LIGHT SYNC controller and
lighting device, refer to the operating
instructions supplied with the
respective device.
* Refer to the operating instructions
supplied with the D-LIGHT SYNC
controller for the recommended lighting
device.
Note
The lighting effect may be different
depending on the connected lighting device
or the type of music being played back.
G AUDIO OUT jacks
Use an audio cord to connect to the
audio input jacks of an optional
component (such as a VCR).
Note
There is no audio output from the AUDIO
OUT jacks when you select the VIDEO,
SAT or TV function.
Listening to a connected TV or
satellite tuner
Press FUNCTION +/– repeatedly (or
press TV/SAT on the unit) to select "TV"
or "SAT".
To switch between the "TV" and
"SAT" function
Use the buttons on the unit for the
operation.
Hold down TV/SAT and press "/1 while
the system is turned on. Release "/1 first,
then release TV/SAT. The system
switches the function from "TV" to
"SAT" or vice versa.
Note
If the sound is distorted or too loud when "TV"
is selected, change the function to "SAT".
Listening to a connected VCR
D-LIGHT SYNC
Press FUNCTION +/– repeatedly to
controller cord
select "VIDEO" (or press VIDEO on the
unit) and start playing the connected
VCR.
Note
The video signal from the connected VCR is
only output through the VIDEO OUT jack of
this unit.
Recording the audio and video
signals from a VIDEO CD onto a video
tape
1
2
Note
The audio signal from the AUDIO OUT jacks
may cut off for a moment during some
operations such as when you press SOUND
FIELD, AUDIO or KARAOKE MODE.
Connect an audio cord (not
supplied) from the AUDIO OUT
jacks and the supplied video cord
from the VIDEO OUT jack to the
audio and video input jacks of your
VCR.
Start recording.
Refer to the operating instructions
provided with connected component.
71 GB