Digital Component Hookups - Sony STR-DE675 Operating Instructions Manual

Digital Component Hookups
Connect the digital output jacks of your DVD player and
satellite tuner (etc ) to the receiver's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home To enjov full effect of multi
f
_
Optical digital cords (not supplied)
Black m
Black
I ,
channel surround sound, five speakers (two front
speakers, two surround speakers, and a center speaker)
and a sub woofer are required You can also connect an
Coaxial digital cord (not supplied)
Yellow a-0 Yellow
LD player with an RF OUT jack via an RF demodulator,
Audio/video cords (not supplied)
such as the Sony MOD-RF1 (not supplied) When connecting a cord, be sure to match the color-coded pins to
DVD or LD
player (etc )*
the appropriate jacks on the components
Yellow (video)
White (L/audio)
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
Note
The optical and coaxial digital input jacks on the receiver are
compatible with sampling frequencies of 32 kHz, 44 1 kHz, and
48kHz
* When making digital audio connections to a DVD playec connect to either the coaxial OR optical digital jacks, and not
both It is recommended to make digital audio connections to the coaxial jack
Please note that you cannot connect an LD player's AC-3 RF OUT jack directly to the receiver's digital input jacks You
must first convert the RF signal to either an optical or coaxial digital signal Connect the LD player to the RF demodulator,
then connect the RF demodulator's optical or coaxial digital output to the receiver's OPTICAL or COAXIAL DVD/LD IN
jack Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups
VIDEO OUT
LD player
AC-3 RF
OUT
Note
When making connections as shown
above,
be sure to set INPUT MODE (m on page 25) manually. The receiver may not operate correctly
if INPUT MODE is set to "AUTO "
8