Digital Component Hookups (Str-De915 Only) - Sony STR-DE915 Operating Instructions Manual

10
Getting Started
T You can play decoded Dolby Digital AC-3
soundtracks through the speakers connected to the
receiver (STR-DE715/DE615/D660Z/D5602 only)
If you have a Dolby Digital (AC-3) decoder, you can use
the receiver to amplify a decoded Dolby Digital AC-3
soundtrack with the following connections. Refer to the
instruction manual supplied with your Dolby Digital
(AC-3) decoder.
Dolby Digital (AC-3) i DVD player or
decoder etc. 7 Receiver LD player etc.
If you have a CONTROL S compatible Sony TV, DBS tuner,
monitor, VCR or LD player (STR-DE915/DE715 (USA,
Canada) only)
Use a CONTROL S cord (supplied) to connect the CTRL S
(STATUS) IN (for TV, DBS tuner, or monitor) or OUT (for
VCR or LD player (STR-DE715 (USA, Canada) only)) jack on
the receiver to the appropriate S-LINK jack on the respective
component. Refer to the Operating Instructions supplied
with your TV, DBS tuner, monitor, VCR, or LD player for
details.
а ee eT
Digital Component Hookups
(STR-DE915 only)
Overview
This section describes how to connect a LD/DVD
player, DAT/MD decks, and CD player equipped with
digital jack(s) to the STR-DE915. If you use a digital
component, select the appropriate input mode for the
component (see page 12).
LD/DVD IN AC-3 RF/OPTICAL
DAT/MD IN/OUT CD IN OPTICAL
OPTICAL
What cords will | need?
* Optical digital connecting cord (not supplied) (1 for a
DVD, LD or CD player; 2 for a DAT or MD deck)
* Coaxial digital connecting cord (not supplied) (1 for a
DVD or LD player)
Lh TI 3»
Hookups
The arrow ==> indicates signal flow.
LD or DVD player
Receiver LD or DVD player
If your LD or DVD player has an optical output jack, connect
it to the LD/DVD IN OPTICAL jack. If your LD player has
an RF output jack, connect it to the LD/DVD IN AC-3 RF
jack of the receiver as shown below.
Receiver LD player
CD player
Receiver _ CD player