Toshiba BDX2300KU User Manual page 16

16
Blu-ray Disc™/DVD player connections
digitalaudio coaxialcable
(not included)
(Sample Illustration) Connecting to a digital amplifier/AV receiver
Connecting to a network
Your Blu-ray Disc™/DVD player can be connected to your home network:
❖
By using a wired network. This provides the best performance, because the attached device
and player are connect directly to the network and are not subject to radio frequency
interference.
❖
By connecting through a wireless LAN adaptor and a wireless access point or router (for
BDX2300KU/BDK23KU model).
❖
By connecting through the built-in wireless device and a wireless access point or router (for
BDX3300KU and BDK33KU models).
Connecting via wired router
Connect one end of an Ethernet cable (CAT5 or better with RJ45 connector) to the Ethernet jack
on the front of your player, and the other end to a wired hub or broadband router.
Networking equipment
(modem, etc.)
LAN
LAN cable
Internet
(Sample Illustration) Connecting to a wired router
Do not connect a modular phone cable to the Ethernet jack.
When plugging or unplugging the cable, hold the connector on the end of the cable.
When unplugging, do not pull on the cable. Press down the lock tab, and then pull the
connector out of the jack.
Because there are various connection configurations, follow the instructions from your
telecommunication carrier or Internet service provider.
Downloaded From Disc-Player.com Toshiba Manuals
DIGITAL AUDIO INPUT AV receiver / amplifier
COAXIAL
Hub or broadband router
WAN LAN
5 4 3 2 1
LANcable