Cisco Aironet Quick Start Manual page 7

3 Associate an IP Address with the Access Point (continued)
In the IP address field, enter the IP address you want to assign to the access point. The IP
Step 4
address should be on the same subnet as the device to which you connect the access point.
In the SSID field, enter the SSID you want to assign to the access point.
Step 5
Note You cannot set the SSID without also setting the IP address. However, you can
set the IP address without setting the SSID.
Step 6 Click Set Parameters.
Finding the DHCP-Assigned IP Address
If your access point receives an IP address from a DHCP server, use IPSU to determine the IP address.
Double-click the IPSU icon on your computer desktop to start IPSU. The following screen
Step 1
appears:
In the Device MAC ID field, enter the MAC address as it appears on the label on the bottom
Step 2
of the access point. It should contain six pairs of hexadecimal digits. For example, your access
point's MAC address might look like this: 00409625854c.
Make sure the Get IP addr is selected in the Function box; click Get IP Address.
Step 3
7