Re-Setting The Id Channel With Your Wireless Devices - AVERATEC B2 Series User Manual

Re-setting the ID Channel with Your Wireless Devices

Your wireless devices were connected and sync'd to the computer at the factory setting, so you can use them with your
computer without any additional sync'ing.
If you need to re-set the ID channel of your system and wireless devices for any reason, follow these instructions:
Wireless keyboard
1. Press the connect button on the back of the computer with a tip of a pencil or paperclip for 1 to 2 seconds.
2. Press the connect button on the bottom of the wireless keyboard for 2 to 5 seconds.
Chapter 2 Getting Started 13