Red Sound SoundBITE Manual For Use page 11

When [CYCLIC] mode is selected this feature allows you to capture and loop any section of the audio track, as
shown in the following example:
A four beat section of a song...
Beats:
Kick Drum:
Vocal:
A four beat loop of the same section - recording triggered
Beats:
Kick Drum:
Vocal:
A four beat loop of the same section - recording triggered 1/2 beat
Beats:
Kick Drum:
Vocal:
A four beat loop of the same section - recording triggered 1/2 beat
Beats:
Kick Drum:
Vocal:
This feature allows you to be totally creative by selecting more abstract sections of the audio 'on the fly' without
being restricted to precise 1,2,4 etc beat sections as they appear in the audio track.
Aborting the Loop Recording:
by simply pressing the selected [LOOP] button again.
Now try recording some more loops using the other loop pads. A total of six loops can be recorded and then played
back simultaneously or individually muted as desired. You can even mute/play other pre-recorded loops as another
loop pad is being recorded.
NOTE: SoundBITE's memory is non-volatile so please remember that all recorded loops will be lost after dis-
connecting the power supply.
Bar 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Bar 2 >>>>
1
Ohhh~~yeeaahhhhhhhhhh
1
yeeaahhhhhhhhhh
1
Ohhh~~yeeaahhhhhhhhhh
1
hhhhhhhh
You can abort the loop recording process at any time during the recording phase
2 3
just before the 1st beat...
2 3
before
2 3
after the 1st beat...
2 3
11
Operation
4
Get 'n the
4
Get 'n the
the 1st beat...
4
Get 'n the
4
Get 'n the
OWNERS MANUAL
1
loop!
1
1
1
loop!