Annex A - Test Sim Information - Siemens A50 Service Manual

ANNEX A
Test SIM card Information
For testing purposes, in combination with the Rohde & Schwarz GSM tester, CMD or CTS, it is
mandatory to use the enclosed test SIM card.
If you do not use this test SIM card, you will encounter difficulties in getting correct measurement
for the Bit Error Rate.
There are two different PIN numbers stored in the SIM card. The PINs and
their respective Master-PIN are:
PIN 1
Master-PIN 1
PIN 2
Master-PIN 2
TABLE A.7 D25 TO D25 CONNECTION
When the SIM card simulation is set to '1' in the INI file, then this
test SIM card is not needed at all
12 34
76 54 32 10
56 78
98 76 54 32
37