3. Basic Operation
This chapter describes the basic principles and procedures involved in operating the
OmniScan SX instrument.
3.1
Turning On and Off the OmniScan SX
This section explains how to turn on and off the OmniScan SX.
To turn on the OmniScan SX
Press the Power key for one second.
The system starts up and performs a memory check.
If the system encounters a problem during the start-up phase, the power indicator
light will indicate the nature of the problem using a color code (for details, see "Power
Indicator Light" in section 2.5 on page 23).
To turn off the OmniScan SX
1.
Quickly press the Power key.
The "Select a command" message appears (see Figure 3-1 on page 34).
DMTA-20043-01EN [U8778624], Rev. B, May 2013
Basic Operation 33