Table of Contents
Advertisement
Quick Links
Installation, Operation and Maintenance Manual
Models:
Cold Bev Max-S2, Cold Bev Max-S2L, Cold Bev Max-S3L
Cold Bev Max-S1BBL, Cold Bev Max-S2BBL, Cold Bev Max-S3BBL
Important
Please read the entire manual before proceeding with
the installation and startup. Your failure to follow any
attached instructions or operating parameters may lead to
the product's failure.
Save manual for future reference
Tested and certified by WQA against NSF/ANSI
Standard 42 for the reduction of claims specified on
the performance data sheet & NSF/ANSI 372 for "lead
free" compliance .
Cold Bev Max-2BBL
Table of Contents
System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Replacement Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Notice to Installers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Filter Cartridge Replacement Procedure . . . . . . . . . . . . . . . . . . . 3
System Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Do not use with water that is microbiologically unsafe or
Note:
of unknown quality without adequate disinfection before or after
the system .
IOM-HS-Cold Bev Max
Advertisement
Table of Contents
Related Manuals for Watts Hydro-Safe Cold Bev Max-S2
Summary of Contents for Watts Hydro-Safe Cold Bev Max-S2
-
Page 1: Table Of Contents
IOM-HS-Cold Bev Max Installation, Operation and Maintenance Manual Models: Cold Bev Max-S2, Cold Bev Max-S2L, Cold Bev Max-S3L Cold Bev Max-S1BBL, Cold Bev Max-S2BBL, Cold Bev Max-S3BBL Important Please read the entire manual before proceeding with the installation and startup. Your failure to follow any attached instructions or operating parameters may lead to the product’s failure. -
Page 2: System Specifications
System Specifications Notice to Installer • Do not discard this manual after installation. This manual contains Maximum Pressure: important operation, maintenance and precautionary information . Slimline Systems - 125 psi (8 .6 bar), Cold Bev Max Models S2, S2L, Please present this manual to the user/owner/operator after instal- lation . -
Page 3: Operation
Operation Maintenance Routine maintenance of this system involves periodic filter changes . With sufficient pressure, operation of this system is completely auto- Filter cartridges should be changed at end of filter life, due to lack of matic . Dependable operation involves only monitoring system pres- filtering performance, or whenever a 15 psi pressure drop or greater sure differential, periodic filter changes, and service documentation . - Page 4 Cold Bev Max-S2 Cold Bev Max-S2L Cold Bev Max-S3L Cold Bev Max-S1BBL...
- Page 5 Cold Bev Max-S2BBL Cold Bev Max-S3BBL Note: Allow 3" (76mm) of clearance at bottom of system for removal of filterbowls for filter cartridge replacement...
- Page 6 Notes...
- Page 7 Notes...
-
Page 8: Limited Warranty
LIMITED WARRANTY: Watts Regulator Co. (the “Company”) warrants each Cold Bev Max water filtration line system, excluding filters and water treatment cartridges, to be free from defects in material and workmanship under normal usage for a period of five years from the date of original shipment. The Company warrants all filters and water treatment cartridges to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.