Motorola SCOUT66-B User Manual page 43

General What is the
significance of LED
flashing?
Connectivity I am not able to access
Issues my Camera.
Setting Up During setup on device
for Android™ and iOS,
during the last step I am
not able to find my
Camera and the setup
fails.
Help
A blinking LED indicates the following
status:
Slow blinking: 1. Your Camera is in
setup mode. You can add the Camera
to your account in this mode. Out of the
box, the Camera is in setup mode. To
reset to setup mode, press and hold the
PAIR button on the bottom of the
Camera untill you hear a beep.
Slow blinking: 2. The Camera is either
connecting to the router or lost the link
to the router. Please ensure that the
Camera is in the Wi-Fi signal range.
LED is stable: The Camera is
connected to the Wi-Fi network.
Please check if the Camera is within
®
Wi-Fi range. If the LED on your
Camera is slow blinking, please try to
move the Camera closer to the router
®
for better Wi-Fi range and try again.
Please reset the Camera to setup
mode and try again. Press and hold
the PAIR button on the bottom of the
Camera untill you hear a beep. Wait
for a minute for the Camera to restart.
When the Camera LED is blinking,
indicating that it is in setup mode.
Now restart the setup from your
Smartphone again.
®
®
43