Connecting To Enzo With Mirrorop; Windows - AMX Enzo NMX-MM-1000 User Manual

Connecting to Enzo with MirrorOp

Launch MirrorOp from your device (installed locally) or USB (Plug and Show). Next, go to the specific section below
for screen capture examples for connecting to Enzo.

Windows

1. Launch the MirrorOp Sender from your Windows device. The following screen appears.
MirrorOp Sender for Windows - Login
FIG. 57
2. Type in the Enzo IP address displayed on the main screen (FIG. 55) into the Remote Box IP line shown in FIG. 57.
3.
Next, type in the code displayed on the Enzo screen into the Login Code line and select Connect.
4.
Once connected to Enzo in MirrorOp, the play button is displayed on a tool bar as shown in FIG. 58. Press it to
become the presenter of your material.
FIG. 58 MirrorOp Sender for Windows - Play Button
Up to 32 devices may connect to Enzo's MirrorOp app simultaneously, but only the last user
to connect is deemed presenter, enabling simple transitions between presenters.
5.
The device's desktop or other programs that are open are now being displayed on the Enzo screen. The play button
changes into a stop button as shown in FIG. 59. The display can be halted at any time by selecting the square button
so another user can select their play button to become the presenter.
MirrorOp Sender for Windows - Stop Button
FIG. 59
User Guide - NMX-MM-1000 Enzo Meeting Presentation System
Windows section on pages 37
Macintosh section on pages 38
Android section on pages 38
iOS section on pages 40
Screen Mirror
37