Advertisement
A) Avoid install to metal material of vehicle, this will influence GPS
signal receive.
B) Avoid install near to the parking sensors/distance control device/ car
alarm and any other which is easily influence the GPS.
*The tinted window film may easily influence and reduce the GPS receive signal.
6. If GPS abnormal/not receiving GPS, suggest change a new place to install
the Tracker device.
V. Wire accessories
1. Red wire, connect to car battery (+),
2. Black wire, connect to car battery ( - )
3. Installation for function: Break off petrol oil and power shutdown through
Cloud computing system:
A) Tracker remote control break oil//engine start - the output
relay coil electric /current should be under 1A.
B) After power connection, continue with setting for
parameter.( Please refer to your parameter setting document).
C) The output relay contact point should connect to serial in for
car engine start/oil pump of relay coil.
:
appearance figure
Block Diagram.
Advertisement
