Advertisement
Signal
Flash
Light on
continuously
No Flash
2. Green LED light (GSM signal)
Signal
Flash quickly
Flash slowly
Light on
continuously
No Flash
3. Red LED light (For battery power)
Signal
Light on
continuously
No Flash
IV. Installation Method
1. GSM SIM card ,should be insert to device and make sure the GPRS is
activate. If your SIM card required enter SIM PIN, please refer to your
hand-phone user's guide to off the SIM PIN function.
2. Tracker will automatically on whenever the SIM card insert and the GPS
Tracker will start to activate.(Noted: sometimes will not activate if it is no
battery. If this happened please charge the GPS Tracker)
3. To activate the Tracker, please place the side with "This side up" on top. If
the Tracker Blue LED light (GPS) never link will directly enter to sleeping mode.
Need to shack the Tracker until Blue light on steady (This mean successfully
link).
4. When install the tracker, suggest in the open space area, GPS signal is
stronger will help for better and stable GPS signal receive.(Installation: avoid
install in raining or wet area).
5. If Tracker install in covert suggest that:
Description
Searching GPS
GPS - receiving under normal status
GPS under searching status/
standby mode
Description
GSM sending data
Not connect to GSM/
Searching GSM
GPRS connect successfully/
under standby mode
Under sleeping mode
Description
Charging Battery
Battery finished charging
Advertisement
