Mounting; Orientation; Rigging; Mounting Diagram - Chauvet GigBar IRC User Manual

Mounting

Orientation

Rigging

Mounting Diagram

Page 16 of 96
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes.
The GigBAR™ IRC must be mounted in a position that includes planning for safe laser usage.
In addition, make sure adequate ventilation is provided around the product.
· Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the product can support
the product's weight (see
· When mounting the product overhead, always use a safety cable (such as CH-05 from
Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a
truss.
· The bracket adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could
damage the knobs.
· When mounting to the tripod, be sure the stand is tightened properly and leveled.
Mounting Clamp
Pod 4
Bracket Adjustment
Knobs
Technical Specifications).
L-Brackets
Safety Cable
Pod 3
Tripod Mounting
Insertion Point
Mounting Clamp
Pod 2
Bracket Adjustment
Knobs
GigBAR™ IRC User Manual Rev. 2
Pod 1