Setup Process 2A - Black Box HS100A Manual

MULTI-PURPOSE AMPLIFIER AND TWO-PRONG CARBON AMPLIFIER
Figure 4-9. Replacing the Battery Lid.
S P 2A
ETUP ROCESS
1. Adjust the telephone type
switch to position E.
Figure 4-10. Adjusting the Telephone Type
Switch to Position E.
2. Insert the two AA batteries
as indicated on the bottom
of the battery compartment.
18
Figure 4-10. Inserting the Batteries.
3. Make a call and adjust the
transmit control to a
satisfactory level. If you still
do not hear a dial tone,
recheck connections and try
the setup again.
Figure 4-11. Adjusting the Transmit
Control.
4. To replace the battery lid,
align it at the right hand
side of the battery
compartment and press
down. Then slide it to the
right.
Figure 4-12. Replacing the Battery Lid.