Connection And Setup; Connecting The Power Cord; Connecting Antenna And Other Devices - RCA RLED2969A Operation Manual

Connection and Setup

Connecting the Power Cord

Connect the power cable with 100-240V power supply.
NOTE:
• The power input for the TV is 100-240V, 50/60Hz.
• Be sure the power cord is disconnected and the TV is switched on before making
connections.
• To be completely disconnected from the supply mains, the mains plug of the television
should be disconnected from the mains socket outlet completely.

Connecting Antenna and Other Devices

The equipment with
HDMI output function
NOTE:
• Make sure that all the components are connected correctly.
• For receiving free to air TV broadcasts, we recommend that you use an external fixed
antenna. Should you require the use of a temporary antenna, please ensure that you
purchase an antenna with sufficient ability to receive in weak signal areas. Only when
you are in close proximity to a transmitter will a temporary antenna reproduce a signal as
strongly as a fixed antenna. A digital antenna on the roof is recommended.
• YPbPr and AV can not be used at same time for they share of one audio channel.
The equipment with
Component output function
Red
Audio R
Audio L
White
Computer
USB Drive(only for service)
COAXIAL
9
The equipment with AV output
function (such as VCR, DVD,
set-top boxes, etc.).
RF Coaxial
Wire(75 ohm)