Troubleshooting Guide - Sylvania SB323 Instructions Manual

Typically, Bluetooth controls are found on the device's tools
or settings menu (see your user manual). Turn on Bluetooth
connectivity and make your device "discoverable".
4. Choose"add a new Bluetooth device"or "setup Bluetooth
device"on your device. It will start to search. Once "SYLVANIA"
shows on your device, select it. If your device prompts you for a
code, please enter 0000. If the pairing attempt fails or times
out, please start pairing procedure again.
5. After your device and the "SYLVANIA"have connected to each
other, a tone can be heard.
NOTE:
The unit will automatically reconnect the last paired device when
Bluetooth mode is reselected from other mode. If for some reason
the Bluetooth connection is lost due to external factors or will not
auto reconnect, you must clear the SYLVANIA from you Bluetooth
Devices list and start the pairing process again.
During playback:
• Press PLAY/PAUSE button to suspend momentarily the playing
track. Press again to resume playing.
• Press TUNE+ button to skip forward to the next track and TUNE-
button to skip backward to the previous track.
• Press MUTE button to turn off the sound. Press again to resume
the sound.
• Press VOLUME+/- buttons to adjust the volume level.
• Press BASS+/- buttons to adjust bass level.
• Press TREBLE+/- buttons to adjust treble level.
• Press EQ button to switch between POP/ JAZZ/ CLASSIC /ROCK and
NORMAL.
GB-16

Troubleshooting guide

Check the followings before requesting service.
SYMPTOM POSSIBLE CAUSE
Power adapter not
connected
The unit is in Standby
No power
mode
Volume in minimum
position
The connected device
No sound
is not in playback
mode
Sound output of the
device is weak
The batteries in the
Remote not
remote control are
working
exhausted
Wrong mode is
AUX IN / LINE IN selected
not working
Wrong mode is
selected
The unit is connected
No response from with another
Bluetooth source Bluetooth device
The connected device
is deactivated
POSSIBLE SOULTION
Connect the adapter
Press the Standby
button on the unit
or remote control to
power on the unit.
Raise volume level
by pressing the VOL
(Volume)+Button
Play the music/movie
in the connected
device
Raise volume level of
the connected device
Replace with new
battery
Press source button
until indicator turns
Green (AUX 1 ) /
Orange (AUX 2)
Press Source button until
indicator turns Blue
Disconnect the
connection and retry.
Activate the
connected device and
start the playback
GB-17