Serene CA-PX User Manual page 7

Battery Installation and Charging
Product Description
1. Tum Power switch to the OFF position . Pull to
Icon Buttons Braille Characters
remove the battery tab to engage the pre-installed
battery. If the tab breaks, remove the security screw
and open the battery door to remove the tab. Close
BrBIlie Ch
aracte~
the battery door an d re-apply the secu rity screw.
Embossed on Buttons
Note: Do not use regular alkaline or other non­
D B P
rechargeable batteries, as they will damage the
unit and void the warranty. For optimal
C
A
M
performances, batteries should be replaced once
S N
every year.
0
R T
2. Plug the AC adapter into the electrical outlet and
connect the charging cable to the CA-PX. If this is
the fi rst time using the batteries , let the batteries
charge for about 3-4 hours before use. Fully
charged batteries can last 3-6 days depending on
usage.
Note: CA-PX must be turned ON during charging
7
D- Door
8 - Baby
P- Phone
C - e I Phone
A AudWl Aiaml
M - MolWln
S - SOS
N - NOAA
L Learn
a - on/oft
R -Resel
T Tona