Related Manuals for Serene CA-PX
Summary of Contents for Serene CA-PX
- Page 1 USER'S MANUAL Wireless Vibrating Personal Receiver Model CA-PX (For The CentralAlert CA-360 Wireless Notification System) Copyright © 2013 Serene Innovations, Inc. All rights reserved. Rev. 0 (a) 11-21-2013...
-
Page 2: Table Of Contents
Product Description............7 Low-Battery Alerts...........15 Connection and Setup..........8 Clear Internal Memory (Factory Default)....15 1. Learning Accessories..........8 Trouble Shooting FAQ..........15 2. Learning CA-PX into a CA-360 System....10 Cleaning and Maintenance........17 Testing................12 Other Accessories for the Model CA-PX....17 Operations..............12 Warranty / Service Information........18 Power On/Off and Speaker On/Off switches...12... -
Page 3: Important Safety Instructions
Important Safety Instructions 9. Protect the power cord from being walked on or pinched. Pay particular attention at plugs, convenience receptacles and the point where Carefully read this manual before operating the they exit from the device. product. Make sure you know how the unit functions 10. - Page 4 WARNING: - Educating children about the dangers of climbing on furniture to reach the equipment. ● Do not place the unit on a surface that vibrates If you doubt your ability to safely mount our (e.g. dryer, washing machine, etc.). The unit television or set up of the equipment, contact should only be placed on flat non-vibrating a professional installer for help.
-
Page 5: Package Content Check
1 – User's Guide General Description 3 – AAA NiMH Rechargeable batteries (inside battery compartment) The CA-PX is a wireless vibrating personal receiver for the hard-of-hearing and deaf/blind users. It features a built-in shaker, speaker, flasher, and blinking icons for alert notification. - Page 6 The CA-PX offers three (3) ways to identify different patterns by feel alerts: blinking icons, unique vibrations and tactile ● Bright flasher can be used as flashlight alert identification. It can be used as a stand-alone ● Low Battery indicator...
-
Page 7: Battery Installation And Charging
2. Plug the AC adapter into the electrical outlet and connect the charging cable to the CA-PX. If this is the first time using the batteries, let the batteries charge for about 3-4 hours before use. Fully charged batteries can last 3-6 days depending on usage. -
Page 8: Connection And Setup
The CA-PX provides four (4) types of alerting outputs: speaker, flasher, blinking icons and vibrations. The CA-PX is ready to use right out of the box. New sensor accessories must be learned (or registered) to CA-PX before they can be recognized. When using... - Page 9 The example below shows a simple system comprised of a personal receiver (CA-PX), a door knock sensor with door hanger (CA-DXH) and an audio sensor (CA-AX) Since no metal mounting clip is visible from the hotel hallway, the use of CA-DXH will not reveal guest that is hard-of-hearing.
-
Page 10: Learning Ca-Px Into A Ca-360 System
CA-PX flashes, vibrates, and beeps (if speaker is On) twice.This confirms the learning. This is a typical application for adding a CA-PX to a 5. Repeat the steps 3 and 4 with the CA-DXH CA-360 system, in order to improve mobility freedom accessory. - Page 11 Verify that both CA-360 and the CA-PX alerts are activated for 45 seconds, or until the Reset button is pressed. 7. The CA-PX is now ready and will alert the user whenever a wireless signal is detected. Follow the steps below: 1.
-
Page 12: Testing
1. While in standby mode, press and hold the SOS The flasher on the top of the unit can be used as a icon button for 2 seconds.If the CA-PX was flashlight. registered to a CA-360 system, all receiver units 1. -
Page 13: Alert Signals Acknowledge
Alert Signals Acknowledge Recall Last Activated Alert Upon receiving a wireless notification signal from any The last activated alert may be recalled for review accessory: purposes. 1. The unit activates a unique motor vibration, 1. Press and hold the Reset button for 2 seconds blinking icon button, flasher and sound and it will recall the last activated alert. -
Page 14: Vibration Pattern Training
3. Press the Reset button to stop or press another button to learn a new vibration pattern. 4. To exit the training session, Power Off the CA- PX unit. 5. CA-PX will not respond to any wireless alert signal during the training session. -
Page 15: Low-Battery Alerts
Low-Battery Alerts Clear Internal Memory (Factory Default) The CA-PX unit has a built-in, low battery detection to If the CA-PX cannot learn (or register) any monitor its own battery condition. The low battery accessories or register into a CA-360 system after... - Page 16 Ans: All new accessory devices must be learned or accessories and the CA-PX? registered to the CA-PX unit (and CA-360 if used as Ans: About 150 feet in open space (metal inside a the master unit) before they can be recognized or wall can reduce this distance).
-
Page 17: Cleaning And Maintenance
● Do not allow liquids to spill into any openings. Model CA-RX A CentralAlert remote unit that serves as a receiver to expand system coverage area (no clock Other Accessories for the Model CA-PX display) Model CA-SOS Wireless personal button for paging Model CA-AX Wireless audio alarm sound help... -
Page 18: Warranty / Service Information
30 days of purchase the units shipping This Warranty gives you specific legal rights and you will be prepaid by Serene Innovations with the proof of may also have other legal rights that vary from state to purchase included. -
Page 19: Specifications
(RMA) and shipping instructions before shipping the Battery Use Time 3 to 6 days depending on product to Serene Innovations. Any shipment without usages an RMA number, will not be accepted and will be AC Adapter Input 100-240 VAC, 50 / 60 Hz returned to you at your expense. -
Page 20: Fcc Rules Information
FCC Rules Information 1. Where it can be done safely, re-orient the receiving television or radio antenna. This device complies with Part 15 of the FCC rules. 2. To the extent possible, relocate the television, Operation is subject to the following two conditions: radio or other receiver, with respect to the cordless (1) this device may not cause harmful interference and phone. - Page 21 satisfaction. Caution: Users should not attempt to make such connections themselves, but should contact the Before installing this equipment, users should ensure appropriate electric inspections authority or electrician, that it is permissible to be connected to the facilities of as appropriate. The REN for this amplified telephone the local telecommunications company.
- Page 22 Serene Innovations, Inc. 14731 Carmenita Road, Norwalk, CA. 90650 Toll Free: 866-376-9271, Fax: 560-483-2087 Website: www.sereneinnovations.com Email: Customercare@Sereneinnovations.com...