Turning On The Tv; Switching On The Tv; Switching Off The Tv; Quick Setup - Toshiba 32AV800AZ Owner's Manual

Turning on the TV

Switching on the TV

Connect the power cord to a wall outlet, the
indicator lights in red (standby mode).
1. Press on the remote control or
control panel, the power indicator lights in green.

Switching off the TV

1. Press on the remote control or
control panel to switch to the standby mode.
Notes:
• This TV is not fully disconnected from the main
supply, as minute current is consumed even when the
TV is turned off. When the TV will not be used for a
long period of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.

Quick Setup

Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure
the antenna is connected. To setup the TV, use the
buttons on the remote control. (
about the remote control)
1. Connect the television to the main power and press
the POWER button. The Quick Setup screen will
appear at the first use.
2. Press ◄ or ► to select the Location and press
the next step.
Location
To use the TV for the display in a store showroom
please select [Store]
[Home] mode is recommended for normal use.
Select
OK
3. Press ◄ or ► to select the Tuning Mode.
Auto Tuning
! Previous setting will be lost!
Press Exit for no change.
Tuning Mode
Start Scan
Edit
16
Getting started
power
on the TV
on the TV
page 14 Learning
Home
Auto Tuning Back
RETURN
ATV and DTV
OK
Back
RETURN
4. To start channel scan, use ▲ or ▼ to select Start
Scan and press
Progress (%)
ATV 20%
DTV 0%
The search will begin for all available stations. The slide
bar will move along the line as the search progresses.
Note: If you skip this step, the channel scan can still be
performed later in the Setup Menu.
to
.
Auto Tuning
Found
0
0
EXIT Stop