Tempstar (F/G)9MAC0601714A Service And Technical Support Manual page 3

SERVICE AND TECHNICAL SUPPORT MANUAL
For Variable Speed Models (F/G)9MAC
Date of Start−Up:
Dealer Name:
Address:
City, State(Province), Zip or Postal Code:
Phone:
Owner Name:
Address:
City, State(Province), Zip or Postal Code:
Model Number:
Serial Number:
Setup Checks
Check the box when task is complete.
All Electrical Connections Tight?
Have hoses been relocated for furnace U/D/H
application?
Condensate Drain Connected?
Condensate Drain Trapped?
Manual Gas Shut−off Upstream of Furnace/Drip Leg
Gas Valve turned ON?
Type of Gas: Natural:
Filter Type and Size:
Shade in Final Furnace Settings Below:
Calculated Input (BTU) Rate: (See Checks and
Adjustments Section).
440 01 4201 01
START−UP CHECK SHEET
(This sheet is optional. Keep for future reference.)
Propane:
Specifications subject to change without notice.
Heating Check
Measured Line Pressure During High Heat:
Measured Manifold Pressure:
Temperature of Supply Air:
Temperature of Return Air:
Temperature Rise (Supply − Return): High Heat
In Rise Range (see furnace rating plate)?
Static Pressure (Ducts) High Heat:
Optional Check:
Cooling Check
Temperature of Supply Air:
Temperature of Return Air:
Temperature Difference:
Static Pressure (Ducts) Cooling:
Dealer Comments:
Gas Furnace: (F/G)9MAC
High Heat
Low Heat
High Heat
Low Heat
Low Heat
Supply
Return
CO?
CO2?
Supply
Return
3