T R A V E L L E R ' S
I M A G E
Streaminfo
About...
Satfind
Shows information on the current stream.
There are three screens. You can flip through
them by using the cursor keys. Page 1 shows
provider and transponder information. Page 2
shows encryption parameters. Page 3 shows
satellite and frequency information, as well as
the signal strength.
Shows version information.
Here you can find three values, indicating the
quality of the currently selected transport
stream:
SNR: Signal Noise Ratio: the signal quality
AGC: Signal quality, should be as high as
possible
BER: Bit Error Ratio, should be 0
Lock and Sync: when both boxes are checked,
a good signal has been found
17