1. IntroductIon To ensure your safety and the safety of others, please ensure that you read all the safety information before operating this product. Keep this information in a safe place for future reference. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
Page 4
Place the product in a well-ventilated area Don’t install it in the cold or under direct sunlight Do not disassemble, repair, Leave a minimum 10cm gap all around the product or reorganize the product Don’t place cups with water or other liquids Don’t place objects on the top of the product...
2. Front panel DISC TRAY. IR RECEIVER: Used to receive the signal from the Infrared (IR) remote control. POWER: Used to switch the player ON or STANDBY. OPEN/CLOSE button. PLAY/PAUSE button. USB CONNECTOR: Used to attach your external USB hub/card reader/storage device. 3.
4. remote control 4.1. Button descrIptIons POWER: Switch the player between on and standby mode. POWE R OPEN/CLOSE 0-9: Numeric keys MENU/ZOOM: Short press to access DVD main menu. Long press to zoom in. SUBTITLE/TITLE: Short press to switch ZOOM among different available subtitles.
Caution: Make sure to check that the voltage of the wall outlet has the same rating than the DVD player. To prevent the risk of electric shock, do not open the cover or the back of the D1200. When connecting the D1200 to other equipment (e.g. TV, VCR and amplifier) make sure to refer to relevant user manual for instruction.
5.1. connectIng to an a/V receIVer wIth dIgItal audIo Input A/V Receiver 6. gettIng started 6.1. power supply For the unIt Connect the unit as shown in “CONNECTIONS”. Insert 2 AAA batteries (supplied) into the battery compartment in the remote control, taking care to follow the correct polarity.
7. user InterFace - maIn menu Please read the following instructions carefully to understand the function of each option. When connecting the power supply for the first time, press the “power” key on the remote control and the device will power on automatically and display the main menu. There are three function options in the main menu.
7.2. dmp menu 7.2.1. photo settings ≥ Slide Show Timing: Set time interval of slide show. ≥ Transition Effect: Set transition effect for photo slide show. ≥ Show Type: set fill mode for picture view. ≥ Color tone: set color tone. 7.3.
Page 11
While an image is magnified, use the arrow keys to pan the image for viewing. To return to the normal view, press the Zoom button until the message appears. ≥ Angle Change the viewing angle on a DVD. This button enables you to view a scene from different angles (the availability of this function depends on the DVD).
≥ Next: Press to skip to the next/previous track or picture. ≥ Stop: Press to stop playback and display the selection menu (JPEG and movie files). Note: Press to play from the beginning. ≥ Zoom: Press to zoom in on an image when playing JPEG or MPEG4 files. ≥...
Page 13
DVDs: Off > Chapter > Title CD /VCD/SVCD: Off > Track > All MP3 / JPEG / WMA files: Off > Track > Folder > Al 10. multImedIa FIles playBack D1200 supports the most common multimedia formats. ≥ Audio: MP3, MP2, WMA ≥...
11. trouBleshootIng If you experience problems with the DVD Energy™ D1200, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. Problem Possible solution No power Check that the power cord is properly connected.
12. specIFIcatIons Item Specification Connectors Video component Component video RCA conectors Coaxial RCA digital audio output USB 2.0 Multimedia playback Compatible with FAT/FAT 32 format Some External HDD can be non compatible Power Input 100—240 V 50—60 Hz Consumption 15 W max. Display TV System PAL, NTSC...
Energy Sistem Soyntec SA is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 12 months.
Need help?
Do you have a question about the d1200 and is the answer not in the manual?
Questions and answers