Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ENERGY SISTEM DVD D1
Summary of Contents for ENERGY SISTEM DVD D1
- Page 1 User manual...
-
Page 3: Important Safety Instructions
INTRODUCTION ™ Energy Sistem Thank you for purchasing the Energy DVD d1 DVD/USB. The following sections provide an overview of your new device and its basic features. Please read everything carefully before start using the product. IMPORTaNT saFeTY INsTRUCTIONs To ensure your safety and the safety of others, please ensure that you read all the safety information before operating this product. -
Page 4: Battery Disposal
Battery Disposal Please ensure batteries are disposed of safely. Never dispose of batteries in a fire or with other household waste. Check with your local authority for disposal regulations. Cleaning ALWAYS unplug the set top box before you clean it. Do not use liquid or aerosol cleaners. -
Page 5: Front Panel
FRONT PaNeL DIsC COVeR: Open/close to insert the disc. POWeR: Used to switch the player ON or STANDBY. sTOP: Stop the current playback. PLaY/PaUse: Start/pause/resume the playback. IR ReCeIVeR: Used to receive the signal from the Infrared (IR) remote control. ReaR PaNeL LeFT aUDIO OUT: Analogic audio output (left). -
Page 6: Remote Control
ReMOTe CONTROL BUTTON DESCRIPTIONS POWeR: Switch the player between on and standby mode. 0-9 and 10+: Numeric keys MeNU/ZOOM: Long press to access DVD main menu. Short press to zoom in. sUBTITLe/TITLe: Short press to switch among DVD/USB different available subtitles. Long press to show the title menu. -
Page 7: Installing The Batteries
INsTaLLINg THe BaTTeRIes Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1. Open the cover 2. Install the batteries 3. - Page 8 CONNeCTIONs Caution: Make sure to check that the voltage of the wall outlet has the same rating than the DVD player. To prevent the risk of electric shock, do not open the cover or the back of the d1. When connecting the d1 to other equipment (e.g. TV, VCR and amplifier) make sure to refer to relevant user manual for instruction.
-
Page 9: Getting Started
geTTINg sTaRTeD POWER SUPPLY FOR THE UNIT Connect the unit as shown in “CONNECTIONS”. Insert 2 AAA batteries (supplied) into the battery compartment in the remote control, taking care to follow the correct polarity. Connect the power cord to an AC mains outlet. Press the POWER button to turn on the unit. - Page 10 LANGUAGE ≥ OsD Language: Set the language of the text displayed in the OSD. ≥ subtitle: Set the default language for subtitles, or disable subtitles. ≥ MPeg4 subtitle: Select the format in which subtitle files characters are encoded. ≥ audio: Select the default language for audio. ≥...
-
Page 11: Playing Dvd Discs
MISC ≥ Use default settings: Reset the DVD to the default factory settings. This option will delete all settings. ≥ screen saver: Enable or disable a screensaver that appears after pause time. PLaYINg DVD DIsCs To access the DVD mode, if it does not play automatically, you must press the DVD / USB button on the top of the remote. - Page 12 scene from different angles (the availability of this function depends on the DVD). Press Angle repeatedly to select different viewing angles. Press AUDIO to select from the audio languages available on the disc. When a disc is playing, press AUDIO to show the current audio language. Press repeatedly to select the desired audio language.
- Page 13 starts playing the disc automatically. Press STOP to avoid this, and it will be displayed the CD or USB browser, with every folders and files SETTINGS There is a menu on the right side of the screen with several options about files selection and files playback.
-
Page 14: Firmware Update
PLaYINg When the disc is being played, you can access to several functions from the remote control of your d1. Press OK or PLAY to start playing the file or files. PAUSE to pause the playback, PLAY again to resume the playback, and STOP to stop it. If your playing Images, press the arrow keys to rotate the image, and NEXT and PREVIOUS to go to the next or previous file. -
Page 15: Troubleshooting
TROUBLesHOOTINg If you experience problems with in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. Problem Possible solution No power Check that the power cord is properly connected. Check that the player is switched on. Press the POWER button. Check that the TV is switched on. -
Page 16: Specifications
sPeCIFICaTIONs Item especificación Video output Composite video, RCA conectors Audio output RCA, Digital coaxial audio output Connectors Multimedia playback USB 2.0 Compatible with FAT/FAT 32 format Some External HDD can be non compatible Input AC 100—240 V 50/60 Hz DC 5V 1.5A Power Consumption 15 W max. -
Page 17: Warranty Procedure
WaRRaNTY Energy Sistem Soyntec S.A. is liable for any lack of conformity which exists at the time the goods were purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 12 months. -
Page 18: Declaration Of Conformity
902 119 034 NIF: A53107488 We declare under our own exclusive responsibility that the product: energy sistem™ DVD d1 Player. Manufacturing country: China Is in compliance with the essential norms and standards of the Directive 2004/108/EC of the European Parliament and of the Council of December 15th 2004.
Need help?
Do you have a question about the DVD D1 and is the answer not in the manual?
Questions and answers