Troubleshooting - Harbor Freight Tools 65040 Owner's Manual And Safety Instructions

troubleshooting

problem
Unit does not spray
Spray pattern is undesirable
Follow all safety precautions whenever diagnosing or servicing the Sprayer.
Page 8
possible causes
1. Not enough liquid in tank.
2. Sprayer not pressurized.
3. Tank Lid loose.
4. Hose Nuts loose.
5. Pump Lid (12) loose.
6. Spray fluid contains particles or
sand.
7. Nozzle and/or Filter clogged
with mineral buildup.
1. Spray fluid contains particles or
sand.
2. Nozzle and/or Filter clogged
with mineral buildup.
For technical questions, please call 1-800-444-3353.
likely Solutions
1. Add liquid to tank.
2. Pump Handle to pressurize Sprayer.
3. Tighten Tank Lid.
4. Tighten Hose Nuts.
5. Tighten Pump Lid.
6. Disassemble, clean, then reassemble
Nozzle and/or Wand Handle and
Tank Filters. Empty, clean, then refill
Tank with properly strained fluid.
7. Disassemble, clean, then reassemble Nozzle
and/or Wand Handle and Tank Filters.
1. Disassemble, clean, then reassemble
Nozzle and/or Wand Handle and
Tank Filters. Empty, clean, then refill
Tank with properly strained fluid.
2. Disassemble, clean, then reassemble Nozzle
and/or Wand Handle and Tank Filters.
™
Item 65040