Harbor Freight Tools Avanti 57042 Owner's Manual
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Paint Sprayer
  5. Avanti 57042
  6. Owner's manual

Harbor Freight Tools Avanti 57042 Owner's Manual

Airless paint, primer & stain sprayer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
RETURNS NOT ACCEPTED
& WARRANTY VOID
if Sprayer is not properly cleaned
immediately after every use.
Clean Sprayer immediately after
use to prevent permanent damage.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20i

Advertisement

Table of Contents
loading

Related Manuals for Harbor Freight Tools Avanti 57042

Summary of Contents for Harbor Freight Tools Avanti 57042

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Important Safety Instructions

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Table of Contents Safety ...............2 Maintenance ............18 Specifications ............8 Parts List and Diagram ..........22 Setup ................9 Warranty ..............24 Operation ..............11 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol.

  • Page 3: Work Area

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. k. Know the contents of the paints and solvents h. Check hoses and parts for signs of damage. being sprayed.

  • Page 4: Electrical Safety

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Electrical Safety 1. Sprayer plugs must match the outlet. Never 4. Do not abuse the cord. Never use the cord for modify the plug in any way.

  • Page 5: Specific Safety Instructions

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. 5. Check for misalignment or binding of moving 6. Use only accessories that are identified by the parts, breakage of parts, and any other condition manufacturer for the specific tool model.
  • Page 6 These carry important safety information. Spray Gun’s nozzle guard in place. If unreadable or missing, contact Harbor Freight Tools for a replacement. 22. Paint Sprayer’s housing may become hot during use. Do not touch housing 27. People with pacemakers should consult their until it has completely cooled.

  • Page 7: Grounded Tools: Tools With Three Prong Plugs

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Grounded Tools: Tools with Three Prong Plugs 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the sprayer.
  • Page 8 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Symbology Symbol Property or Statement Symbol Property or Statement WARNING marking concerning Volts Risk of Eye Injury. Wear ANSI-approved eye protection.

  • Page 9: Components And Controls

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Setup – Before Use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 10 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Assembly 1. Attach Handle 3. Attach Spray Hose Attach Spray Hose to Spray Hose Outlet. NOTE: Handle can be reversed so that Spray Tighten securely with included wrench.
  • Page 11 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 12 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. TO PREVENT SERIOUS INJURY: Do not spray flammable or combustible liquids in a confined area. Spray area must be well ventilated. Do not smoke while spraying or spray where sparks or flame is present.
  • Page 13 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Prime with Paint 1. Prime with solvent according to Prime 7. Prime Pump: with Solvent on page 12. a.

  • Page 14: Accessories And Replacement Parts

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Accessories and Replacement Parts Accessories Accessories are available at Harbor Freight stores and at http://www.harborfreight.com. 32 oz. Storage Fluid Spray Gun 50' Spray Hose* Nozzle Guard...
  • Page 15 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Spraying WARNING! TO PREVENT SERIOUS INJURY: Only water-based materials or materials with a minimum flash point of 38°C (100°F) should be used for spraying and cleaning. Only use water or mineral spirits for priming and cleaning.
  • Page 16 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. User-Maintenance Instructions After Every Use - Cleaning WARNING! TO PREVENT SERIOUS INJURY: Only water-based materials or materials with a minimum flash point of 38°C (100°F) should be used for spraying and cleaning.

  • Page 17: Long Term Storage

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. 16. Clean Spray Gun Filter, Nozzle f. Remove Filter by turning it counterclockwise. Guard and Spray Tip g.

  • Page 18: Maintenance And Lubrication

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Maintenance and Lubrication Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Sprayer from its electrical outlet before performing any inspection or maintenance procedures.
  • Page 19 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Spray Tip and Nozzle Guard Attach 1. Seat Seal on end of Spray Tip, then insert 3. Remove Tip, then thread Nozzle Guard onto Seal into back of Nozzle Guard.

  • Page 20: Troubleshooting

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Troubleshooting Problem Possible Causes Likely Solutions Pump will not prime. Insufficient cleaning left Press the prime button underneath the input valve clogged.
  • Page 21 RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.

  • Page 22: Parts List

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Parts List and Diagram Parts List Part Description Part Description Handle Suction Hose Clip Screw Metal Support 2 PCBA Cover Screw Hose Storage...

  • Page 23: Assembly Diagram

    RETURNS NOT ACCEPTED & WARRANTY VOID if Sprayer is not properly cleaned immediately after every use. Clean Sprayer immediately to prevent permanent damage. Assembly Diagram 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 Item 57042 For technical questions, please call 1-888-866-5797.
  • Page 24 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents