Curtis DVD1053 Instructions For Use Manual page 10

SET UP MENU (in play or stop modes)
20.
20.1 Press the SETUP button and the general set up menu is displayed.
20.2 Use the UP / DOWN buttons (
button to enter the feature menu.
20.3 Use the UP / DOWN buttons (
button to enter the sub menu for this function.
20.4 Use the UP / DOWN buttons (
select and confirm. A tick will be shown against the option selected.
20.5 Use the LEFT (
Note Some functions in the step up menu may only be accessed when the player is in stop mode or a disc is
not present.
SET UP MENU SUB MENU /
/ FEATURE FUNCTIONS
Language OSD Lang
Menu
Audio
Subtitle
Video TV Type
Screen Saver
TV System
Video output
Brightness
Contrast
Audio Setup Digital out
Downmix
Custom Setup Parental
control
Password
Style
Angle Mark
Default
) until the desired feature / functions are displayed. Use the RIGHT (
) until the desired function is highlighted and use the RIGHT (
) to navigate to the desired option and press the ENTER button to
) button to move to another feature or press the SET UP button to exit this function.
OPTIONS
English
French
German
Italian
Spanish
Varies by disc
Varies by disc
Varies by disc
4:3PS
4:3LB
16:9
On
Off
NTSC
PAL
Auto
S-video
RGB
CVBS+YUV
YUV P-SCAN
Normal
Brightness
Soft
-4 to +4
SPDIF/PCM
SPDIF/RAW
Off
Lo/Ro
Lt/Rt
1 Kid safe
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 Adult
Off
Style 1
Style 2
Style 3
Style 4
On
Off
Reset
DEFAULT Explanation
SETTING
English Sets the language of the display menus
English Sets the language of disc menu
English Sets the language being heard
English Sets the language of the subtitles
4:3PS Sets the aspect ratio – choose the aspect that
corresponds to the TV the player is connected to.
(Note: PS = Pan and scan, LB = Letter box)
On Select to switch screen saver function on or off. If
screen saver function is switched on the screen will
go blank after approximately 3 minutes without DVD
activity.
PAL Selects the video system
RGB Selects the video source output
Normal Brightens or darkens the picture
0 Increases or decreases picture contrast
SPDIF/RAW Output coded signal as shown
Lo/Ro Selects plain (Lo/Ro) or an encoded (Lt/Rt) audio
signal suitable for Dolby decoder.
8 Select to set censorship level of programmes
viewed without a password being entered.
8888 Select to change password.
Style 3 Changes background colour of the display.
on Select to switch the angle mark on or off
Select to return to the default OSD settings.
10
)
)