Table of Contents
Advertisement
I
G
NSTALLATION
UIDE
5.2
If you are using the unit for the first time or have restored the unit to Factory Default, the installation
Guide Menu will appear on your TV screen. Follow the help information that at the bottom of the
window to select preference menu language and suitable country (Region) and start channel search.
(1) [OSD Language] Press RIGHT/LEFT key to select a language.
(2) [Country] Press RIGHT/LEFT key to select your country of residence.
(3) [Channel Search] Press RIGHT or OK key to begin Automatic channel search.
If no channel is found during the channel searching process, please check your antenna connections
and antenna are in working order. After the scanning process is completed the receiver will
automatically save the scanned channels and display the first channel in the list.
While you are using the unit, if you wish to perform an AUTO search, simply press the SCAN key
on the remote control. Or you can access the CHANNEL SEARCH menu to do the AUTO/MANUAL
channel search. Press MENU key on the remote and select [Channel Search] using RIGHT/LEFT
keys.
This Menu provides options to adjust the Search Channel settings. Press UP/DOWN to select an
option and press RIGHT/LEFT to adjust the settings. Press EXIT to exit the Menu.
MENU
6
MAIN MENU
Most functions are available in main menu. Follow the operation help information on the
bottom of the menu to modify the preference options.
A password will be required when
modifying advanced options in the Menu. The default password is "000000".
Press the MENU key on the remote control; you can access the Main MENU. There are 7
items for set up. Use the LEFT and RIGHT keys to navigate through the menu. Select
the desired option and press the OK key or the RIGHT key to adjust the settings. Press
the EXIT key to exit the main menu.
6
Advertisement
Table of Contents
