Battery Installation - Pars PSTB-9011 User Manual

Battery Installation

Insert the batteries while observing the correct (+) and (-) polarities as illustrated below:
About the batteries

If the remote control unit fails to work even when it is operated near the receiver, please replace
the batteries.

Use size 2XAAA R03P batteries.
Notes:

Do not use rechargeable (Ni-Cd) batteries.

Do not attempt to recharge, short circuit, disassemble or throw the batteries into the fire.

Do not drop, step on or cause any impact to the remote control unit. This may damage it,
resulting in malfunction.

Do not mix old and new batteries.

If the remote control unit is not going to be used for a long time, remove the batteries.
Caution
Keep batteries out of children's reach. If batteries are swallowed, contact a physician immediately.
3