Locating The Air Cleaner - Aprilaire 5000 Safety And Installation Manual

LOCATING THE AIR CLEANER

The Model 5000 can be installed in a
variety of ways. The figures below show
some of the possibilities.
The air cleaner may be installed on the
left or right side of the air handler. If
installed on the right, the ON/OFF switch
will be on top and the nameplate will be
on the bottom. Remove the nameplate
and rotate it 180° to read properly.
Bottom Return in upflow
"Highboy" installation.
(Figure 4)
Inline in duct, horizontal
or vertical installation.
(Figure 5)
Side Return in upflow
"Highboy" installation.
(Figures 6 & 7)
Compact Side Return in upflow
"Highboy" installation (Figures 8 & 9).
Either of the methods shown in Figures
6 and 7 will result in a narrower
"footprint", creating better clearance
in tight mounting applications.
4
FIGURE 3 – Clearance for Inner Housing Removal
It is important to leave enough room to remove
and re-install the Inner Housing.
Allow Clearance for Removal of Inner Housing
for Filter Replacement.
FIGURE 4
Airflow
Note: Air
Cleaner outer
housing can
support up to
400 lbs.
FIGURE 6
Airflow
Left side
install shown
FIGURE 8
Airflow
Plenum
Box
FIGURE 5
Left side
install shown
90-1158
FIGURE 7
Airflow
30 max.
45 max.
Minimize Angles
Where Possible
90-1160
FIGURE 9
Airflow
Plenum
Box
Size Plenum Box to fit outer housing
90-1162
without door: 17
See Figure 2 for complete dimensions
90-666
Airflow
90-1159
90-1161
90-1163
3 / " x 28 1 / "
4 8