BenQ FP241W User Manual page 29

•If the input source of the main window is from the computer graphic/PC video signals
(D-sub, DVI, HDMI, or Component), you will cycle through the following messages
indicating the video input sources for the PIP window.
•If the input source of the main window is from the video signals (Composite or S-video),
you will cycle through the following messages indicating the computer graphic/PC video
signals for the PIP window.
Mode hot key
Downloaded from ManualMonitor.com Manuals
PIP off and Exit
PIP off and Exit
Press the key continually to switch between
the 5 modes for the main window, including
Standard, Movie, Dynamics, Photo, and
sRGB. The setting will take effect immedi-
ately.
See also
Picture Mode on page 37.
How to adjust your monitor 29