Adjusting The Monitor Height And Angle - BenQ FP241W User Manual

9. Turn on the power.
Connect the other end of power cable to the nearby elec-
tric outlet.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power key located at
the top of the row of keys on the right edge of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
to install the monitor software.
on page 16

Adjusting the monitor height and angle

To adjust the monitor height
Gently lift the display up and extend the stand to the desired height. The stand can be extended
vertically up to 130mm.
If the monitor is locked in the down position, press the Lock down / release button on the bottom
rear of stand to extend the monitor to a preferred height.
12 How to assemble your monitor hardware
Downloaded from ManualMonitor.com Manuals