Table of Contents
Advertisement
8.
PLAY MODE
8.1
Play mode - DVD
8.1.1
Switch on the DVD player at the mains, press the POWER ( ) button on the player, turn on the TV and
amplifier (if connected).
8.1.2
Press the OPEN / CLOSE ( ) button ('open' will appear in the display and on the TV screen) and insert a
disc (label side up). For a double-sided disc place the disc with the A/1 up. Press the button again to close
the disc tray ('close' will appear in the display and on the TV screen).
8.1.3
The unit will take a few seconds to download the initial data from the disc, the display will show 'load' and
the TV screen will show 'loading' and the disc type logo.
8.1.4
The DVD menu / title will be displayed on screen where the casting information, product history, movie
introduction etc. can be accessed.
8.1.5
Using the NAVIGATION (
chapter using the number (0-9) buttons and then press the ENTER button to confirm the selection.
8.1.6
The disc will now start to play.
8.1.7
To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator '
' will appear on the screen. Press the MUTE button a second time to restore the sound.
8.1.8
To pause the play, press the PLAY / PAUSE ( ) button, the pause indicator ( ) will appear in the display
and on the TV screen to show that pause mode has been selected. Press the PLAY / PAUSE ( ) button
again, the play indicator ( ) will appear in the display and on the TV and the disc will resume playing at the
point that the disc was paused.
8.1.9
To stop play
•
Press the STOP ( ) button ONCE, to stop the disc playing, 'stop' will appear in the display. If the PLAY
/ PAUSE ( ) button is pressed the disc will resume playing at the point at which it is stopped.
•
Press the STOP button TWICE, to stop the disc playing, '
been selected. If the PLAY / PAUSE ( ) button is pressed the disc will restart at the beginning.
8.1.10 To place the DVD player into standby mode, press the POWER ( ) button on the remote control.
8.1.11 To turn the DVD player off at any time press the POWER ( ) button on the main unit.
8.2
Play mode – audio CD
8.2.1
Switch on the DVD player at the mains, press the POWER ( ) button on the player, turn on the TV and
amplifier (if connected).
8.2.2
Press the OPEN / CLOSE (
insert a disc . For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc
tray ('close' will appear in the display and on the TV screen).
8.2.3
The unit will take a few seconds to download the initial data from the disc, the display will show 'load' and
the TV screen will show 'loading' and the CD will automatically start. The CD track number will be
displayed briefly on the TV screen and the display and TV will then show the time that the track has been
playing.
8.2.4
To adjust the volume to the desired level using the VOL (+ or -) buttons. The volume will appear on the
screen. The sound can be silenced by pressing the MUTE button on the remote control and the mute
indicator '
' will appear in the lower left hand corner of the screen. Press the MUTE button a second time
to restore the sound.
8.2.5
To pause the play, press the PLAY / PAUSE ( ) button, the pause indicator ( ) will appear in the display
and on the TV screen to show that pause mode has been selected. Press the PLAY / PAUSE ( ) button
again, the play indicator ( ) will appear in the display and on the TV and the disc will resume playing at the
point that the disc was paused.
8.2.6
To select a specific track to be played, enter the track number directly and the disc will start to play from
the track selected. Alternatively use the NEXT / PREV (
track of choice is located.
8.2.7
To stop play
•
Press the STOP ( ) button ONCE, to stop the disc playing, 'stop' will appear in the display. If the PLAY
/ PAUSE ( ) button is pressed the disc will resume playing at the point at which it is stopped.
•
Press the STOP ( ) button TWICE, to stop the disc playing, 'Stop' will appear in the display to show stop
has been selected. If the PLAY / PAUSE ( ) button is pressed the disc will restart at the beginning.
8.2.8
To place the DVD player into standby mode, press the POWER ( ) button on the remote control.
8.2.9
To turn the DVD player off at any time press the POWER ( ) button on the main unit.
) buttons, highlight the desired feature or enter the number of the
) button ('open' will appear in the display and '
6
S top' will appear in display to show stop has
open' on the TV screen) and
/
) buttons to move forward or back until the
Advertisement
Table of Contents
