Dealer Preparation Before Sending The Ex-12 To Customer - Scutch EX-12 Technical Reference Manual

EX-12
Router vs Computer USB Connection:
We have received input from our DEALERs that Computer connection is not always practical because the
key system phone control box and the computer router are normally located in the phone room, and
there is normally not a computer in the vicinity. We agree, but on the other hand for smaller companies,
who are more price sensitive and that do NOT have a key system , connection to a computer is far
superior. MOH adapters are easy for the customer to install directly on a telephone. Normally
computers are located very close to phones, so for smaller businesses that have four lines or less,
computer connection makes a lot more sense. This allows the customer themselves to install the entire
system.
Key System Options:
If your customer has a Key Telephone System and wants to use the EX-12 there are two options:
1- A CAT-5 cable can be run from the nearest computer to the phone room where the EX-12 is
mounted next to the key system. The CAT-5 cable length can be a maximum of 1320 ft long.
2- A standard shielded audio cable (2 conductor) cable can be run from the Output of the EX-12,
located near a computer, to the key system MOH input.

Dealer Preparation before sending the EX-12 to Customer:

The following three items MUST be done by the DEALER before the unit is sent to the customer.
1- Establish a unique GMAIL email account for the customer's EX-12.
2- Create the customer's SETUP.TXT file and copy it to the EX-12's Flash Drive.
3- Copy the Customer's MP3 audio production on the Flash Drive.
The easiest way to perform these steps is to use the Skutch Dealer "EX12 PREP" software. This software
is available ON LINE for NO CHARGE. It is a Windows based program.
www.skutchelectronics.com/ex-12.htm
For Version 2.00
REMOTE Updatable MOH MP3 Player
Page 7