Network Settings - Samsung BD-J5500 User Manual

Network Settings

Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
NotES
✎
This unit can only be connected to a Network
`
via a wired connection.
Wired Network Settings
1.
In the Home menu, press the ▲▼◄►
buttons to select Settings, and then
press the v button.
2. Network,
Press the ▲▼ buttons to select
and then press the v button.
3. Wired
Press the ▲▼ buttons to select
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Settings
Wired Network Settings
Picture
Internet Protocol Setup : Auto
Sound
\
IP Address : 0 0 0 0
Network
Subnet Mask : 0 0 0 0
System
Gateway : 0 0 0 0
Language
DNS : Auto
Security
DNS Server : 0 0 0 0
General
Support > Move " Select ' Return
4.
In the Internet Protocol Setup field, select
Auto if it is not selected. (Press v to
select Auto, and then press v .)
5.
The Auto Function acquires and fills in the
values for Ip Address, Subnet Mask,
etc., automatically.
NotES
✎
This process can take up to five minutes.
`
6.
After the Network Function has acquired
the network values, press the REtuRN
button.
7. Network test, and then press v
Select
to ensure the player has connected to
your network.
8.
When the Network Test is complete, press
the REtuRN twice to return to the Main
Menu.
9.
If the Network Function does not acquire
the network values, go to the directions
for Manual Setup.
Manual Network Setup
Before you start manual network setup, you
need the network setting values.
To get the network setting values, contact
your ISP (Internet Service Provider) or your
network administrator.
To enter the Network Settings into your
player, follow these steps:
1.
In the Home menu, press the ▲▼◄►
buttons to select Settings, and then
press the v button.
2. Network,
Press the ▲▼ buttons to select
and then press the v button.
3. Wired
Press the ▲▼ buttons to select
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
4.
Select the Internet Protocol Setup field,
and then press the v button.
5. Manual,
Press the ▲▼ buttons to select
and then press the v button.
6.
Press the ▼ button to go to the first entry
field (IP Address).
7.
Use the number buttons on your remote
to enter numbers.
8.
When done with each field, use the ►
button to move to the next field. You can
also use the other arrow buttons to move
up, down, and back.
9. Ip Address, Subnet Mask, and
Enter the
Gateway values in the same way.
10. dNS.
Press the ▼ button to go to
11.
Press the ▼ button to go to the first DNS
entry field.
12.
Enter the numbers as above.
13. REtuRN button on your
Press the
remote control.
14.
Run a Network Test to ensure the player
has connected to your network.
Network test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
device Name
Device Name function allows you to change
player's name by selecting from device name
list.
Bd-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All)
• : The Internet connection is
allowed for all BD-LIVE contents.
Allow (Valid only)
• : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
prohibit
• : No Internet connection is allowed
for any BD-LIVE content.
NotES
✎
What is a valid certificate?
`
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
The Internet connection may be restricted
`
while you are using BD-LIVE contents.
using Bd-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
1.
Attach a USB memory stick to the USB jack
on the front of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
2.
Insert a Blu-ray Disc that supports BD-
LIVE.
3.
Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
NotES
✎
The way you use BD-LIVE and the provided
`
contents may differ, depending on the disc
manufacturer.
13