Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SRM IndoorTrainer
Summary of Contents for SRM IndoorTrainer
-
Page 1: User Manual
IndoorTrainer electronic User Manual User Manual Manual Controls and Windows Operating System Page 1 of 22 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. 6 D-52428 Jülich Tel.: +49-2461-69123-0 Version 11/25/2014 Fax:+49-2461-69123-17 www.SRM.de... -
Page 2: Table Of Contents
No Speed Reading ................................. 19 No Connection to the Computer ............................. 19 Additional Information ................................. 20 Caring for your IndoorTrainer ........................21 Adjustment Range of your IndoorTrainer ....................21 Technical Data and Specifications ........................ 22 Page 2 of 22 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. - Page 3 The brake electronics are located in the brake box which is attached to the frame. The brake box is not waterproof. When cleaning the IndoorTrainer, do not let water get inside the brake box. Clean the box only with a damp cloth.
-
Page 4: Adjusting The Seat Position
IndoorTrainer electronic User Manual Adjusting the Seat Position The SRM IndoorTrainer is designed for riders between 165 cm (5'5'') and 200 cm (6'7'') of height. The seat height and position are fully adjustable. The saddle and the handlebars can be adjusted continuously, as shown by the red arrows. -
Page 5: Using The Sliders To Adjust The Seat And Handlebar Position
IndoorTrainer electronic User Manual Using the Sliders to Adjust the Seat and Handlebar Position Adjust the seat and handlebar position by loosening the appropriate lever, moving the slider, and tightening the lever. Once the position is adjusted, the levers can... - Page 6 IndoorTrainer electronic User Manual Page 6 of 22 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. 6 D-52428 Jülich Tel.: +49-2461-69123-0 Fax:+49-2461-69123-17 www.SRM.de...
-
Page 7: The Electronic Brake
IndoorTrainer electronic User Manual The Electronic Brake The SRM IndoorTrainer has an electronic Gobat MagneticDays magnetic brake. The brake can be controlled electronically via your computer or manually via two keys on the handlebar. Electronic Brake, Parts Keys for manual control of the brake... -
Page 8: Connecting The Usb Cable To The Brake Box
IndoorTrainer electronic User Manual Connecting the USB Cable to the Brake Box Ports on the front facing side of the brake box: ANT Sensor Mini USB plug for connecting to a computer. This cable is required to connect to a PC (Windows operating system) and control the brake via the Gobat software. -
Page 9: Options For Controlling The Electronic Brake
Workout Mode: Customized Control via Computer, Brake Setup). This setting is recommended for repeats and interval training. The initial setting is in 10 W increments. Connect your IndoorTrainer to a computer in order to customize the settings. In order to switch back to manual mode, push both keys simultaneously. The light turns off. -
Page 10: Workout Mode: Customized Control Via Computer
IndoorTrainer electronic User Manual Workout Mode: Customized Control via Computer The Gobat software is only compatible with the Windows operating system. Connect the brake to the computer via the USB cable. Connecting via bluetooth is currently not an option. Follow the instructions below to install the Gobat software. - Page 11 Brake Setup The following setup is required before using the brake for the first time. The brake must be connected to the SRM PowerMeter. If the setup is not completed, the brake will not work. The brake reacts to the input received from the PowerMeter.
- Page 12 User Manual The setup window appears: Under Type, choose SRM. Turn the crank a few times to turn the PowerMeter on. Then click on Send Data. The Common Data section contains the brake parameters. Under Wheel, enter the wheel circumference of 1884 mm.
- Page 13 IndoorTrainer electronic User Manual For the software to show the same values as the PowerControl, the numbers in the Smoothing setting must be the same as the numbers for the Smoothing Interval in your PowerControl. In order to adjust the settings in your PowerControl, enter the SRMWin software, click on Setup of PowerControl, and then choose Special.
-
Page 14: The Display
IndoorTrainer electronic User Manual The Display Power Cadence Heart rate The display is organized into three columns: The first column (Now) shows your current data: Duration Power (W) Cadence (1/min) Heart rate (1/min) The second column (Step) shows the target parameters of the current interval:... - Page 15 Click RESET to reset your training ride. Click AUTO to toggle between Manual Mode (control the IndoorTrainer via the +/- icons) and Workout Mode (automatic control of the IndoorTrainer after creating a workout under Training). In Workout Mode, the letter A appears next to the +/- icons. In Workout Mode, the resistance level can be adjusted at any time via the keypad on the handlebar.
-
Page 16: Creating A Workout
IndoorTrainer electronic User Manual Creating a Workout Click on Training, to open the following window: Create a workout by entering the settings for each interval. Every row contains the parameters for one interval. In the first column (Time (sec)), enter the duration of the interval in seconds. -
Page 17: Starting A Workout
IndoorTrainer electronic User Manual Starting a Workout Click on the Exit/Load Training icon in the lower right hand corner to upload a workout: Page 17 of 22 Schoberer Rad Messtechnik GmbH Rudolf Schulten Str. 6 D-52428 Jülich Tel.: +49-2461-69123-0 Fax:+49-2461-69123-17... - Page 18 IndoorTrainer electronic User Manual Your workout was uploaded: During your workout, the current data is displayed in the left column, the target values for the current interval are displayed in the middle, and the target values for the next interval are shown on the right:...
-
Page 19: Electronic Brake Power
IndoorTrainer electronic User Manual At the end of the workout, the software switches to Manual Mode. Electronic Brake Power The brake power specifications below are for the factory settings of the magnetic brake when used with a 53T chainring and a 15T cog. -
Page 20: Additional Information
This field counts the data packages exchanged by the PowerMeter and the brake. Field 3 This field contains the serial number of your brake, here 022. MD stands for Magnetic Days, and SRM means that the brake belongs to an SRM IndoorTrainer. -
Page 21: Caring For Your Indoortrainer
User Manual Caring for your IndoorTrainer In order to fully enjoy your IndoorTrainer, we recommend to wipe it down after every workout. Remove the handlebar post and the seatpost, and wipe them down with a soft cloth. To protect your IndoorTrainer from corrosion, we recommend that the surfaces of the IndoorTrainer periodically be treated with a silicone polish for protection. -
Page 22: Technical Data And Specifications
1400 mm x 550 mm Bottom bracket BSA 68 mm Seatpost diameter 27.2 mm Electronic brake Gobat MagneticDays for SRM IndoorTrainer Number of positions of the magnetic brake Number of magnets in the magnetic brake Data transmission Data transmission PowerMeter/Brake ANT+...
Need help?
Do you have a question about the IndoorTrainer and is the answer not in the manual?
Questions and answers