Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SRM PowerMeter
Summary of Contents for SRM PowerMeter
- Page 1 System User Manual www.SRM.de Revision 07132016 © 2016 SRM GMBH...
- Page 2 Allow PC8/device to connect to GPS in order to set time (See PC8 or head unit manual for setting proper time for your location) Download and connect your PC8 to SRM Device Agent to create your personal rider profile, customize the display and enhance connectivity to data analysis software.
-
Page 3: Power Control
Training System Components Components sold as a complete system and sold separately. Additional accessories can be found at: http://store.srm.de/accessories.html Speed Sensor PowerMeter Cadence Magnet Speed Sensor Magnet USB Cable Heart Rate Strap PowerControl Handlebar Mount Training System Components... -
Page 4: Powermeter Installation
The cadence magnet must be installed properly in order for the PowerMeter to turn on and measure cadence. 3. Once the magnet is in the correct position the PowerMeter can be turned on by rotating the cranks, refer to PowerControl or device manual to pair and confirm proper magnet position. - Page 5 1. Clean both the magnet and the mounting surface of the frame with the alcohol swab provided. 2. Position the magnet 4 -6 mm from the backside of the PowerMeter. It is recommended to temporarily fix the magnet in place and confirm correct position before installing with the tape double sided tape.
-
Page 6: Battery Cover
Handlebar Mount and PowerControl Installation 1. Install the handlebar mount onto the handlebar. Use a 3 mm hex key to tighten the bolt to 1-2 N . m. 2. Install the PowerControl onto the spring clip of the handlebar mount. Speed Sensor and Magnet Installation 1. - Page 7 Cleaning and Service The SRM PowerMeter and PowerControl are sealed to prevent water entry. However, we do not advise cleaning with a pressure washer. Use a mild detergent with a soft brush or cloth to clean your PowerMeter and PowerControl. Do not clean your PowerMeter in a solvent parts washer.
-
Page 8: Warranty
SRM PowerMeter or SRM PowerControl at the sole option of SRM. To make a claim under this Warranty, proof of purchase must be provided. The product must also be registered with SRM USA before a warranty claim may be processed. - Page 9 Refurbished Products: Refurbished PowerMeters and PowerControls are covered with a one-year limited warranty to be free from defects in materials or workmanship. Within this period, SRM will, at its option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any necessary transportation cost.
- Page 10 There are pot holes, distracted drivers, debris, animals, weather, and many other ways to crash or damage the SRM PowerMeter. To keep customers in the SRM family, we offer a LIFETIME Crash Replacement Policy to the original owner.
-
Page 11: Fcc Compliance Declaration
Consult the dealer or an experienced radio/TV technician for help. This product does not contain any user serviceable-parts. Repairs should only be made by an authorized SRM Service Center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. - Page 12 SRM USA 720 West Monument Street Colorado Springs, CO 80904 Phone: 1 (719) 266-4127 Fax: 1 (719) 266-4284 Web: www.SRM.de...
Need help?
Do you have a question about the PowerMeter and is the answer not in the manual?
Questions and answers