Running The Iwizard Setup Utility - COMPRO IP540 User Manual

Compro IP540(P) / IP570(P)

Running the iWizard Setup Utility

Before running Compro software, make sure you have the IP Camera beside you. To , insert the installation CD
supplied with the camera into your CD-ROM drive, and the iWizard utility will start and guide you during the
installation process of the hardware and software for your IP camera. You will be asked to select the displayed
language first. Then please click on [IP Camera Setup] and select the camera you wish to install, and follow
the steps below.
1. The wizard searches for all available
cameras on your local network. Click on
a camera from connected camera list,
and wait until the live video and camera
information are displayed on the right
side. (You can double-check the device
name and the MAC ID which are printed
on the serial number sticker at the back of
IP camera and on the package). Then, click
[Next].
2. Meanwhile, if you see the Windows
Security Alert dialog box during the
search, please choose [Unblock]..
3. The default password is admin. We
strongly recommend you enter a new
password to protect your system. (Please
note down your new password) You can
also click [Next] to skip this step and retain
default password.
3-6 Installing Camera Software
Figure 3-7. Camera selection
Figure 3-8. Security alert dialog (Windows XP)
Figure 3-9. Password setup