Panasonic KX-TG2511HG Operating Instructions Manual page 34

TG2511_2521HG(e-hg).book Page 34 Thursday, January 21, 2010 3:16 PM
Useful Information
Making/answering calls, intercom
Problem
w is flashing.
Noise is heard, sound cuts in and
out.
The handset does not ring.
I cannot make a call.
*1 KX-TG2512
*2 KX-TG2521
34
Cause/solution
L The handset is too far from the base unit. Move
closer.
L The base unit's AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
L The handset is not registered to the base unit.
Register it (36. oldal).
L Activating one touch eco mode reduces the range
of the base unit in standby mode. If required, turn
eco mode off (12. oldal).
L You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L Unplug the base unit's AC adaptor to reset the unit
and turn off the handset. Reconnect the adaptor,
turn on the handset and try again.
L The ringer volume is turned off. Adjust ringer
volume (18. oldal).
L The dialling mode may be set incorrectly. Change
the setting (11. oldal).
L The handset is too far from the base unit. Move
closer and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used.
again later.
*1
*2
Wait and try