Curtis DVB102UK User Manual page 26

(2) Progress
During the download progress a message will be displayed which
details to the user any message that the manufacturer requires this
message is broadcast as part of the download and isn't hard-coded
into the interface. The message may describe new features of the
download or a contact number in case of download failure. A
progress bar and a time remaining countdown is displayed during
the download.
If the download fails the following error message will be displayed.
Downloading
If the television uses one FLASH chip, the new images is download
into another memory space and then written to FLASH when the new
images has been verified.
During this period the user must not turn off the receiver and the
following message is displayed. While this message is displayed the
television will not respond to any key presses.
(3) Download message after restart
When the receiver restarts after a download, the following menu will
be displayed. This can contain either a success or failure message
and any other information about the new software.
Don't Switch Off the Receiver
4.6) Technical Information
The Technical Information screen displays the hardware version
number and software version numbers. The software version numbers
depend on what modules are built into the software.
4.7)Antenna Setup
This menu allows the user to enable or disable the antenna power for
an external active which requires 5V power supply.
The message "Antenna Overload" will be displayed and the 5V power
will be disabled automatically if it is short circuit to ground.
Download Fail
Download Completed
22