Curtis DVB102UK User Manual page 5

1. Front panel
1
1. REMOTE CONTROL SENSOR: Used to receive the signal from the remote
control.
USB JACK(Optional): Used to connect to an external USB 2.0 device.
2.
Note: Not all receivers have the USB Jack.
1. RF IN : This socket connects to your external aerial.
2. RF OUT: This socket will bypass the RF signal to either your
3 . TV SCART: This socket connects to your TV.
4. MAINS CABLE: This is used to connect to your main power supply.
1 2 3
TV or another video system.
1
4