1.2 ABOUT THIS MANUAL 2.2 NOTES 1.3 PACKAGE CONTENTS 2.3 TROUBLESHOOTING 1.4 FRONT VIEW 2.4 TECHNICAL SUPPORT INFORMATION 1.4.1 Front Features 1.5 SIDE VIEW 1.5.1 Side Features 1.6 REAR VIEW 1.6.1 Rear Features OWC DIGITAL - THUNDERBOLT 2 DOCK TABLE OF CONTENTS...
Firmware, images, and descriptions may vary slightly between this manual and the unit shipped. Functions and features may change depending on the firmware version. Please visit the product webpage for the most recent product specifications. OWC DIGITAL - THUNDERBOLT 2 DOCK INTRODUCTION...
USB 3.0 high-power ports 1.4.1 Front Features There are two LEDs on the bottom of the OWC Digital Thunderbolt 2 Dock near the front. 1.5.1 Side Features • Data LED (green) — This LED will glow green when the dock has an active data •...
FireWire devices off of the first FireWire device. 8. DC power input — Connect the included power supply here. 5. Gigabit Ethernet port — Connect an Ethernet cable here to access a wired network. OWC DIGITAL - THUNDERBOLT 2 DOCK INTRODUCTION...
A Thunderbolt- or DisplayPort-equipped monitor can also be added to the end of a HDMI display. Other combinations or adapters will not work. Thunderbolt device chain. • The high-power USB 3.0 ports on the side of the dock will remain on and provide power to OWC DIGITAL - THUNDERBOLT 2 DOCK APPENDIX...
Information and clicking on the ‘Thunderbolt’ category on the left. If the dock is seen by the www.owcdigital.com/livechat/ computer but one or more connected devices are not, troubleshoot each device individually. If problems persist, contact OWC Digital technical support for more information (Section 2.4). Email support is available at: www.owcdigital.com/support/...
Need help?
Do you have a question about the Thunderbolt2 Dock and is the answer not in the manual?
Questions and answers