Fujitsu Siemens Computers SCENICVIEW P996-1 Operating Manual page 22

Colour Monitor SCENICVIEW P996-1
Set or deactivate moiré reduction
With this function you set the effectiveness of the horizontal and vertical Moiré reduction.
To deactivate the moiré reduction, set the value to 0.
If the picture you see on screen has light and dark stripes or appears dull and blurred, this
may be due to what is known as the moiré effect. This effect usually has physical causes,
being triggered by interference between the pixels in the matrix and the video signal. The
intensity of the moiré effect is dependent on the screen resolution and horizontal frequency.
Set the picture size, brightness, etc. before you switch on moiré reduction.
i
Only switch moiré reduction on if you can see light and dark stripes on your screen,
or if the picture is dull and blurred.
In some cases, moiré reduction may cause the picture quality to deteriorate
(reduced picture definition, slight flickering).
Degaussing the screen
When colour shifts occur in the screen display due to the influence of magnetic fields (e.g.
after transporting or turning the screen), the screen must be degaussed.
Do not use the feature more than once within a 15-minute period.
Activating the factory settings
There are factory settings for the picture position, picture size, pincushion, trapezoidal and
parallelogram distortion, as well as moiré reduction in the default operating modes.
Select the option "Activate factory settings" (=Yes) with the button
Select the option "Cancel function'" (=NO) with the button
When you activate the factory settings, the functions named above are reset to the
factory settings. All other settings remain unchanged.
i
14 - English
Downloaded from ManualMonitor.com Manuals
.
4
.
3
A26361-K967-Z100-1-5E19,
Edition 1