Troubleshooting; Common Problems; Imaging Problems - Philips 220SW9 User Manual

Troubleshooting

• Safety and
Troubleshooting
• FAQs
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these

• Common Problems

solutions, contact Philips customer service representative.

• Imaging Problems

• Regulatory Information
• Other Related
Information
Downloaded from ManualMonitor.com Manuals
Common Problems
Having this problem
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Check these items
Make sure the power cord is plugged into the power outlet
and into the back of the monitor.
First, ensure that the power button on the front of the monitor
is in the OFF position, then press it to the ON position.
Make sure the computer is turned on.
Make sure the signal cable is properly connected to your
computer.
Check to see if the monitor cable has bent pins.
The Energy Saving feature may be activated
Make sure the monitor cable is properly connected to your
computer. (Also refer to the Quick Set-Up Guide).
Check to see if the monitor cable has bent pins.
Make sure the computer is turned on.
The Auto Function is designed for use on standard Macintosh
or IBM-compatible PCs running Microsoft Windows.
It may not work properly if using nonstandard PC or video
card.