Cleaning And Maintenance; Technical Data - Akai AMD350 User Manual

7.Cleaning and maintenance

WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance.
Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth
slightly with water and a neutral solution.
7.1. Handle and care of a disc

Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch
the disc surface.

Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources.

Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently, radially, from
centre towards the outer edge.

Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will
permanently damage the disc surface.

8.Technical data

AMD350 Microset
Voltage: 230VAC / 50 Hz
Power consumption: 35W
Frequency response: +/- 1,5 dB (20Hz ~20KHz)
Speaker output: 2 x 50W RMS
Disc output
Television system: PAL/NTSC
Frequency range: 20Hz ~20KHz
Signal/noise ratio: >80dB (1kHz)
Dynamic range: >70dB (1kHz)
Distortion: < -60dB (1kHz)
Remote control
Battery size: AAA
Radio
Frequency range: 87,5~108 MHz
Supported media formats
Disc types: DVD / DVD+R(W) / DVD-R(W) / S (VDC) / CD / CD-R / CD-RW
Picture formats: JPEG / Kodak Picture CD
Video formats: MP3 / WMA
Audio formats: MP3
Working environment
Operating temperature: - 10 ~ +35 C(elsius)
Relative humidity: 5% ~90%