Bluetooth; Turn Bluetooth On Or Off; Connect A Bluetooth Headset Or Car Kit - Samsung Galaxy SIII User Manual

3. Enter the Network SSID. This is the name of your Wi-Fi network.
4. Tap the Security field and select a security option. This must match the current security setting
on your target network.
5. Tap Connect to store the new information and connect to the Wi-Fi network.
Note: The next time your phone connects to a previously accessed or secured wireless network, you are
not prompted to enter the wireless password again, unless you reset your phone back to its factory
default settings.
Scan for a Wi-Fi Network
1. Press
2. Tap Scan.

Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number
of Bluetooth phones, such as headsets and hands-free car kits, and Bluetooth-enabled handhelds,
computers, printers, and wireless phones. The Bluetooth communication range is usually approximately
30 feet.

Turn Bluetooth On or Off

The following procedures will guide you through turning on and turning off your Bluetooth phone.
1. Press
2. Tap the ON/OFF switch to move it into the ON position to turn Bluetooth on.
Tip: You can also turn Bluetooth on and off through the Notifications panel. Drag the Notifications panel
down and tap Bluetooth to enable or disable Bluetooth.
Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a wireless
phone is prohibited, such as aboard an aircraft and in hospitals.

Connect a Bluetooth Headset or Car Kit

You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a
compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-free
devices.
To listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth
profile.
1. Press
2. If Bluetooth is not on, tap the ON/OFF switch to turn it on.
3. Make sure that the headset is discoverable, so that your phone can find the headset. Refer to the
instructions that came with the headset to find out how to set it to discoverable mode.
Web and Data
and tap > Settings > Connections > Wi-Fi.
and tap > Settings > Connections > Bluetooth.
and tap > Settings > Connections > Bluetooth.
62